Beyond the Box

Expand Your business with our suite of audio-visual services for integrators

Furman- M-8S

15A Standard Power Conditioner with Power Sequencing, 1RU, 10ft Cord

Manufacturer: Furman
Category: Power Conditioner
Availability: In Stock
MSRP: $399.95
Furman Sound M-8S 15 Amp Standard Power Conditioner with Power Sequencing is the perfect low-cost AC power solution for any rack mount system. Install an M-8S in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-amp load.
  • Standard Power Conditioner with Power Sequencing
  • 15 amp rating with circuit breaker
  • Standard level AC protection and filtering
  • Six sequenced rear panel outlets (in 3 groups), two unswitched rear panel outlets, and one front panel unswitched outlet
  • Momentary and Maintained sequencing via rear panel terminal block or front panel switch (momentary only)
  • Momentary and Maintained sequencing via rear panel terminal block or front panel switch (momentary only)
  • Indicator LEDs for outlet banks, protection OK and power Status
  • Plug spacing for various plugs/ transformers
  • Noise filtering to reduce radio frequency and electromagnetic interference
General Information
ManufacturerFurman Sound, Inc
Manufacturer Part NumberM-8S
Manufacturer Website Address
Brand NameFurman Sound
Product ModelM-8S
Product TypeLine Conditioner
Technical Information
Protection TypeSurge
Plug/Connector TypeNEMA 5-15P
Receptacles9 x AC Power
Power Description
Input Voltage120 V AC
Output Voltage12 V DC to 30 V DC
Current15 A
Surge Energy Rating225 J
Physical Characteristics
Power Cord/Cable10 ft
Additional Information
  • Standard level AC Surge Protection : Merit Class (sacrificial)
  • Spike Protection Mode : Line to neutral, zero ground leakage
  • Max Continuous Operating Voltage : 130V RMS
  • Max Clamp Voltage : 500 Volts Peak
  • Peak Impulse Current : 12,000 Amps
  • AC Filtering : Standard level Pi LCR Filter
  • Noise Attenuation : >26dB, 100 Khz to 1 MHz
  • Operating Temperature Range : 5C (40F) to 40C (105F) degrees
  • Humidity Range : <90% rH (Relative Humidity)
  • Rocker Switch : Front panel, Sequence (ON, OFF)
  • Thermal Circuit Breaker : Front panel, push to reset
  • Front Panel Indicators : Delay 1, Delay 2, Delay 3, Power, Protection OK
  • Rear Panel DIP Switches : 12V Mode On/Off, GND Mode On, Momentary/Maintained
  • Potentiometer : Rear panel, time calibration fine tune delay adjust
  • Remote Terminal : Phoenix type 4-Pin Connector with Screw terminals; +12V, STAT, REM, GND (Class 2 Wiring)
  • Safety Agency : C/CSA/US
Limited Warranty3 Year Limited