The Atlona AT-HDR-MX1616 is a 16×16 HDMI® to HDBaseT™ matrix switcher for high dynamic range (HDR) formats. It is HDCP 2.2 compliant, supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, and data rates up to 18 Gbps.
The HDR-MX1616 enables flexible routing of 16 HDMI input signals to 16 HDBaseT outputs that support transmission of video, audio, Ethernet, control signals, and power up to 330 feet (100 meters) over CAT6A cable. Each HDBaseT output also has a mirrored HDMI output for connection to local display devices.
The built-in audio matrix routes up to 16 2CH PCM de-embedded audio sources to 16 unbalanced stereo analog outputs for integration with multi-zone audio distribution systems. Each audio output has independent volume and mute control.
The HDR-MX1616 provides TCP/IP, RS-232, and IR ports for control of the switcher itself. It also supports independent RS-232, IR, and CEC communications over each HDBaseT output for controlling remote displays and peripherals.
The HDR-MX1616 is housed in a 4U enclosure with active cooling to ensure continuous reliability. It also provides remote power to compatible HDBaseT receivers. Access the Compatibility Table for information on receivers for the HDR-MX1616.
- 4K HDR matrix switcher with 16 HDMI inputs and 16 HDBaseT outputs
- 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling
- Features visually lossless compression with no latency to enable HDR and 4K/60 4:4:4 video signal extension over HDBaseT
- HDCP 2.2 compliant
- Supports HDR10, HLG, and Dolby Vision® HDR formats
- HDBaseT outputs extend 4K HDR video, multi-channel audio, Ethernet, control signals, and power up to 330 feet (100 meters) over Category 6A cable
- Built-in audio matrix routes de-embedded audio sources to unbalanced stereo analog outputs with independent volume control for integration with zoned audio systems
- Remotely powers compatible receivers over HDBaseT
- Manages EDID communications between source and display devices with automatic, user defined, or preset configurations.
- Front panel button controls and display
- Intuitive GUI-based configuration using integrated web server
- Flexible control options via TCP/IP, RS-232, and IR with Atlona Velocity™ or third-party control systems
- TCP/IP to RS-232 proxy for bi-directional serial communications through the receivers over HDBaseT
- Supports automatic CEC display power controls as well as triggering by TCP/IP or RS-232 for both HDBaseT and mirrored HDMI for each output
- Rack mountable 4U, full-rack width enclosure
- Included Accessories: Captive screw connectors (3-pin), IEC Cable, mounting ears w/screws, feet w/screws