Beyond the Box

Expand Your business with our suite of audio-visual services for integrators

Crown- DCI4X600

DCI4|600; DriveCore Install Series - Analog

Manufacturer: Crown
Category: Amplifiers
Availability: Call
MSRP: $3,298.00
The DriveCore Install 4|600 4-Channel Amplifier 600 Watts x 4 from Crown Audio is capable of producing 600 watts of output per channel at 4 or 8 ohms or 70 or 100 volts rms. Its channels can be bridged for powering higher-power applications such as a subwoofer. The 4|600 also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 4 channels additionally features independent attenuators with an attenuation range from 0 to -80dB. The front panel of the 4|600 provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use. The 4|600 is rackmountable and requires 2 rack units of space.
  • You can use smaller-gauge wiring to drive the speakers using either 70Vrms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces audio more efficiently
  • Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in hi-Z mode (70 Vrms or 100 Vrms). This means design flexibility since DCi powers all loads on a channel-by-channel basis
  • The DriveCore Install Series channels are bridgeable, even in 100 Vrms mode, allowing them to be used to for higher-power applications like subwoofers
  • The 4|600 can be integrated into a control system for remote on/off control
  • Efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise
  • The 4|600 automatically goes into sleep mode after 30 minutes of no input signal
  • The amp has built-in protection from excessive heat by applying gain reduction when necessary
  • Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over- or under-voltage, and high-frequency overload
General Information
ManufacturerHarman International Industries, Inc
Manufacturer Part NumberDCI4X600
Manufacturer Website Address
Brand NameCrown
Product LineDriveCore Install
Product SeriesDCi
Product Model4|600
Product NameDCi 4|600 Four-channel, 600W @ 4? Analog Power Amplifier
Product TypeAmplifier
Technical Information
Minimum Frequency Response20 Hz
Maximum Frequency Response20 kHz
Total Harmonic Distortion (THD)0.4%
Impedance8 Ohm
Audio Channels4
RMS Output Power600 W
Power Description
Input Voltage120 V AC
 230 V AC
Frequency60 Hz
Limited Warranty3 Year