The TruLink HDMI + VGA + stereo audio + composite video + audio over Cat5 kit is a complete solution for extension of HDMI video and audio, VGA video, stereo audio, composite video and audio signals over three Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 300ft. HDMI video is supported at up to a 1080p video resolution while VGA is supported at up to a 1920x1200p resolution and composite video is supported at a 480i video resolution. HDMI digital audio is supported through HDMI port, while 3.5mm port supports stereo audio and two RCA audio inputs of transmitter accept a stereo audio input, mix two channels of audio into a single signal which is sent to this receiver then duplicated so that both channels of audio are sent to white and to red RCA output ports on receiver.
- Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
- Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
- Available without trim flange for non-ceiling recessed applications
- Available without trim flange for non-ceiling recessed applications
- TruGuide™ Electric Screen Tensioning System provides optimal viewing surface smoothness
- TruGuide™ Electric Screen Tensioning System provides optimal viewing surface smoothness
- UL Plenum rated case
- UL Plenum rated case
- Standard radio frequency motor with hand-held remote and dry contact interface
- Standard radio frequency motor with hand-held remote and dry contact interface
- Optional radio frequency control accessories include single channel wall switch and RS-232 interface
- Optional radio frequency control accessories include single channel wall switch and RS-232 interface
- Standard black backing retains projected brightness on front projection surfaces
- Standard black backing retains projected brightness on front projection surfaces
- Seamless surfaces in all models
- Seamless surfaces in all models
- Parallax Stratos 1.0 surface for standard throw projectors (1.0:1 or greater)
- Parallax Stratos 1.0 surface for standard throw projectors (1.0:1 or greater)