• MAC Aura XB Special Effect Light
• User manual
• M12 Bolt Suitable for Use with Martin Rigging Clamps

• in Cardboard Box

• Beam color mixing: RGBW
• Aura (secondary lens array illumination) color mixing: RGB
• Beam color temperature control: CTO, variable 10,000 - 2500 K
• Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
• Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
• Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
• Electronic dimming: Independent beam and aura, four dimming curve options
• Pan: 540°
• Tilt: 232°
• Pan and tilt speed: Adjustable via onboard control panel and DMX

• Control systems: DMX, RDM
• Control options: Independent or synchronized Beam and Aura control
• Control resolution: 8-bit, with 16-bit control of pan & tilt
• DMX channels: 14/25
• Setting and addressing: Control panel with backlit graphic display
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• Transceiver: RS-485
• Firmware update: Via DMX with Martin™ USB Duo DMX Interface Box

OPTICS AND PHOTOMETRIC DATA:

• Light Source: 19x 15W RGBW LED Array System
• LED Refresh Rate Beam: 1200 Hz
• LED Refresh Rate Aura: 4395 Hz
• Total luminous output (wide, one-tenth peak): 6000 lumens
• Total luminous output (narrow, one-tenth peak): 4300 lumens
• Binning: Tight color and flux binning
• Calibration: Full Gamut Color Calibration
• Color Modes: Extended Mode, Calibrated Mode and Raw Mode
• Video compatibility: Designed for use with HD/high-speed video cameras
• Minimum LED lifetime: 50,000 hours (to >70% luminous output)

• Protection rating: IP20

INSTALLATION:

• Mounting points: M12 hole for rigging clamp, attachment points for surface-mounting bracket
• Minimum distance to combustible materials: 200 mm (8.0 in.)
• Minimum distance to illuminated surfaces: 1 m (3 ft. 4 in.)

• AC Power: Neutrik PowerCON TRUE1 NAC3PX dual socket
• AC power input socket: Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector
• AC power thru socket: Accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector
• DMX and RDM data in/out: 5-pin locking XLR

ELECTRICAL:

• AC power: 100-240 V nominal, 50/60 Hz
• Typical half-cycle RMS inrush current: 10.7 A
• Power supply unit: Auto-ranging electronic switch mode
• Typical power consumption, all effects static, zero light output: <25 W
• Maximum total power consumption: 400 W

• Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): 5° C (41° F)
• Total heat dissipation (calculated, +/- 10%): 1230 BTU/hr.

• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
• EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
• US safety: UL 1573
• US EMC: FCC Part 15 Class A