| Additional Information | DYNAMIC EFFECTS: - Color mixing: CMY, independently variable 0 - 100%
- Color wheel: 7 interchangeable dichroic filters + open, indexing, continuous rotation, random color
- Beam shaping: Internal barn doors, continuously variable opening, indexed rotation
- Iris: 0 - 100%, pulse effects
- Mechanical dimmer/shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout
- Color temperature control: CTO, variable 6000 - 3200 K
- Dimming options: Choice of four dimming curves
- Zoom: Motorized
- Pan: 540°
- Tilt: 268°
- Position correction system: Absolute position monitoring
CONTROL AND PROGRAMMING:
- DMX channels: 18/24
- 16-bit control: Dimmer, pan, tilt
- Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
- Receiver: Opto-isolated RS-485
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: USB memory device or USB/DMX hardware interface over DMX link
OPTICS:
- Zoom range: 13.5° - 59° (1:5)
- Output: 33,000 lumens
LAMP:
- CRI (Color rendering index): >85
- Average lifetime: 750 hours
- Socket: PGJX36
- Ballast: Electronic
- Approved lamps: Osram Lok-it! 1000/PS Brilliant, Osram Lok-it! 1000W/PS VS1, Philips
- MSR Gold MiniFastFit 1000W
SERVICE UTILITIES:
- Fixture identification: User-settable fixture ID number
CONSTRUCTION:
- Reflector: Glass, cold light
- Protection rating: IP20
INSTALLATION:
- Mounting points: Eight quarter-turn locking points
- Orientation: Any
- Minimum distance to combustible materials: 0.3 m (1.0 ft.)
- Minimum distance to illuminated surfaces: 3.4 m (11.2 ft.)
CONNECTIONS:
- AC power input: Neutrik PowerCon
- DMX and RDM data in/out: 5-pin locking XLR
- USB memory devices: USB host socket
ELECTRICAL:
- AC power: 120-240 V nominal, 50/60 Hz
- Typical half-cycle RMS inrush current: 16.2 A
- Power supply unit: Auto-ranging electronic switch-mode
TYPICAL POWER AND CURRENT:
- 120 V, 60 Hz: 1225 W, 10.3 A, PF 0.999
- 208 V, 60 Hz: 1190 W, 5.8 A, PF 0.996
- 230 V, 50 Hz: 1186 W, 5.2 A, PF 0.994
- 240 V, 50 Hz: 1194 W, 5.0 A, PF 0.993
THERMAL:
- Cooling: Filtered forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 5° C (41° F)
- Maximum surface temperature, steady state, at 40° C ambient: 150° C (302° F)
- Total heat dissipation (calculated, +/- 10% at 120 V, 60 Hz): 4180 BTU/hr
APPROVALS:
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
- EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61547
- US safety: UL 1573 (pending)
- US EMC: FCC Part 15 Class A
- Canadian safety: CSA E598-2-17 (CSA E60598-1) (pending)
- Canadian EMC: ICES-003 Class A
- Australia/NZ: C-TICK N4241
|