Buy High Performance, Wide Coverage Audio Products

RDL - Room Control for RCX-5C Room Combiner-Decora Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RCX2C MSRP: $485.19

Quick Quote View Details

RDL - Remote Level Control-Rotary Optical Encoder-stainless steel

Model: DS-RLC10 MSRP: $424.38

The D SERIES-RLC10 is a rotary remote level control that provides user adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-term trouble-free and noise...-free operation. These controls directly connect to any RDL VCA and OEM equipment with 0 to 10 Vdc ramp inputs.A single -RLC10 may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the MASTER. The MASTER mode causes this control to drive the 0 to 10 Vdc ramp output and to monitor its pulse terminals in case any other -RLC10 controls are connected.As many as nine additional -RLC10 controls may be wired in parallel with the MASTER control using UTP cable (CAT5, CAT6 or equivalent). The rear-panel MODE switch on each additional remote control is set to SLAVE mode.Operation is the same for a single control, or for each control connected in a multiple control point installation. The 0 to 10 Vdc ramp voltage is incremented up or down when the front-panel knob is rotated. Acceleration is provided so the rate of change is faster when the knob is rotated more rapidly, yielding a responsive feel and rapid elimination of acoustic feedback. The LED ring display encircling the control knob operates as a virtual pointer. When an -RLC10 is not being adjusted, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity during adjustment.In the event of power loss, internal non-volatile memory stores the last level value. When power is restored, the 0 to 10 V output will return to the operating level present when power was lost.Multiple -RLC10 controls set to the SLAVE MODE may be connected to an RDL RU-VCA2A or RU-VCA6A, utilizing the VCA as the ramp generator. This connection is also possible with OEM equipment accepting open-collector pulses that are compatible with the -RLC10 output pulse rate and width.The -RLC10 controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Connections are made through a rear panel detachable terminal block.All the D SERIES-RLC10 features combine to make it the ideal choice for single point or multiple location remote level control in high quality systems. Use them with any RDL VCA module, or side-by-side with other RDL remote accessories as part of a complete audio/video system

Product Features:

Rotary Optical Encoder Remote Level Control
Single or Multiple Control Locations
Up To Ten Remote Control Locations

Quick Quote View Details

RDL - Remote Level Control-Rotary Optical Encoder-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC10C MSRP: $474.38

Quick Quote View Details

RDL - Remote Level Controller-0 to 10 k Ohm-stainless steel

Model: DS-RLC10K MSRP: $71.42

The RLC10K is the ideal companion to the RDL VCA modules where levels are to be controlled from a single remote location. It is designed to directly interface with the 3-wire control input of the VCA module. The RLC10K contains a high-quality 10...

Quick Quote View Details

RDL - Remote Level Controller-0 to 10 k Ohm-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC10KC MSRP: $121.42

Quick Quote View Details

RDL - Remote Level Control with Muting-stainless steel

Model: DS-RLC10KM MSRP: $195.32

The RLC10KM is the ideal companion to RDL VCA modules where levels are to be controlled from a single remote location and pushbutton muting is desired. It is designed to directly interface with the 3 wire control input of an RDL VCA module. A si...

Quick Quote View Details

RDL - Remote Level Control with Muting-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC10KMC MSRP: $245.32

The RLC10KM is the ideal companion to RDL VCA modules where levels are to be controlled from a single remote location and pushbutton muting is desired. It is designed to directly interface with the 3 wire control input of an RDL VCA module. A si...

Quick Quote View Details

RDL - Remote Level Control with Muting-Rotary Optical Encoder-stainless steel

Model: DS-RLC10M MSRP: $428.79

The D SERIES-RLC10M is a rotary remote level control with pushbutton muting that provides user adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-ter...m trouble-free and noise-free operation. These controls directly connect to any RDL VCA and OEM equipment with 0 to 10 Vdc ramp inputs.A single -RLC10M may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the MASTER. The MASTER mode causes this control to drive the 0 to 10 Vdc ramp output and to monitor its pulse terminals in case any other -RLC10M controls are connected.As many as nine additional -RLC10M controls may be wired in parallel with the MASTER control using UTP cable (CAT5, CAT6 or equivalent). The rear-panel MODE switch on each additional remote control is set to SLAVE mode.Operation is the same for a single control, or for each control connected in a multiple control point installation. The 0 to 10 Vdc ramp voltage is incremented up or down when the front-panel knob is rotated. Acceleration is provided so the rate of change is faster when the knob is rotated more rapidly, yielding a responsive feel and rapid elimination of acoustic feedback. The LED ring display encircling the control knob operates as a virtual pointer. When an -RLC10M is not being adjusted, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity during adjustment.Upon power-up or re-powering after a power loss, the 0 to 10 Vdc ramp will output either a preset level or the last level used. The power-up mode is stored when the control is installed. When programmed for the preset level mode, the user can store a new preset level by holding the MUTE button for more than 3 seconds.Multiple -RLC10M controls set to the SLAVE MODE may be connected to an RDL RU-VCA2A or RU-VCA6A, utilizing the VCA as the ramp generator. This connection is also possible with OEM equipment accepting open-collector pulses that are compatible with the -RLC10M output pulse rate and width.The -RLC10M controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Connections are made through a rear panel detachable terminal block. The MUTE pushbutton is a long-life switch mounted to provide protection from excessive frontal force.All the D SERIES-RLC10M features combine to make it the ideal choice for single point or multiple location remote level control with muting in high quality systems. Use them with any RDL VCA module, or side-by-side with other RDL remote accessories as part of a complete audio/video system.

Product Features:

Rotary Optical Encoder Remote Level Control
Single or Multiple Control Locations
Up To Ten Remote Control Locations

Quick Quote View Details

RDL - Remote Level Control with Muting-Rotary Optical Encoder-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC10MC MSRP: $478.79

Quick Quote View Details

RDL - Remote Level Controller-Ramp-stainless steel

Model: DS-RLC2 MSRP: $262.57

The DS-RLC2 is the ideal choice where levels are to be controlled from a single, or from multiple control locations, and visual level indication is desired.The DS-RLC2 is designed to directly interface with RDL control modules, such as the STICK...

Quick Quote View Details

RDL - Remote Level Controller-Ramp-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC2C MSRP: $312.57

Quick Quote View Details

RDL - Remote Level Controller-Preset Levels-stainless steel

Model: DS-RLC3 MSRP: $272.01

The DS-RLC3 is designed to directly interface with RDL control modules which feature a 0 to 10 Vdc control input utilizing an external 10 kΩ resistive control, such as the ST-VCA3, RU-VCA2A and RU-VA6A voltage controlled amplifiers. The DS...

Quick Quote View Details

RDL - Remote Level Controller-Preset Levels-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC3C MSRP: $322.01

Quick Quote View Details

RDL - DS-RN22 Wall-Mounted Bi-Directional Mic/Line Dante Interface 2x2

Model: DS-RN22 MSRP: $970.92

The D-RN22 is a complete wall-mounted Dante or AES67 audio network interface. It features two XLR mic or line inputs on the front panel and two balanced line outputs on a rear-panel detachable wiring block. The module is configured and adjusted ...using RDL CONSOLE or other network control software. The D-RN22 fits a standard US single-gang electrical box or an RDL WB-1U back box for installations in European or similar thinner walls. The D-RN22 is PoE powered and is available in multiple finishes with optional customized graphics.Mic/Line to Network SectionThe two XLR inputs are each converted to a separate Dante network transmit channel. Five gain settings are software-selectable for XLR inputs. Three gain settings are provided to match condenser or dynamic microphones. Two gain settings are provided to match standard line levels. P48 phantom voltage may be software enabled when an input is set for mic level.Network to Line SectionTwo Dante audio channels are converted to balanced line level feeding a rear-panel detachable wiring block. Each output provides +4dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a software-controlled attenuator adjustable in 1 dB steps to a maximum attenuation of 63 dB then OFF. The outputs may drive local power amplifiers or may feed additional XLR jacks mounted adjacent to the D-RN22 in a dual-gang box. Two XLR mic or line outputs may be provided using an RDL D-D2 equipped with two AMS-XLRMA jacks, available separately.Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.The D-RN22 is a professional grade product with RDL mic preamplifiers for studio quality fidelity and low noise performance, coupled through XLR jacks housed in a steel chassis with a powder-coated or stainless-steel Decora front plate.The D-RN22's superior performance specifications make it ideally suited to installations requiring network control and exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A. for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Single-Gang Dante or AES67 Network Interface for Two Audio Inputs and Two Audio Outputs
Two Front-Panel Mic/Line Inputs on Balanced XLR Jacks
Two Balanced Rear-Panel Outputs on Detachable Wiring Block

Quick Quote View Details

RDL - Remote Control Selector-stainless steel

Model: DS-RT2 MSRP: $195.88

The front panel of the DS-RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selectsON. An LED adjacent to each button shows which mode...

Quick Quote View Details

RDL - Remote Control Selector-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RT2C MSRP: $245.88

Quick Quote View Details

RDL - Room Control Station for SourceFlex Distributed Audio System-SS

Model: DS-SFRC8 MSRP: $430.90

The D SERIES-SFRC8 Room Control Station is a SourceFlex listening station for wall mounting in a room, providing source selection and volume control from up to 8 audio sources. A numeric display shows the selected source. There are two line-leve...

Quick Quote View Details

RDL - Room Control Station for SourceFlex Distributed Audio System-SS -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-SFRC8C MSRP: $480.90

Quick Quote View Details

RDL - Audio Selector for SourceFlex Distributed Audio System-SS

Model: DS-SFRC8L MSRP: $316.77

The D SERIES-SFRC8L Audio Selector is a SourceFlex module for wall mounting in a room, providing source selection from up to 8 audio sources. A numeric display shows the selected source. There are two line-level audio outputs on the rear of the ...

Quick Quote View Details

RDL - Audio Selector for SourceFlex Distributed Audio System-SS -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-SFRC8LC MSRP: $366.77

Quick Quote View Details

RDL - Stereo Headphone Amplifier-Decora panel with user level control

Model: DS-SH1 MSRP: $283.35

The D/DS SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. The D/DS-SH1 is ideally suited to applications as diverse as language translation, museums, interview studios an...

Quick Quote View Details

RDL - Stereo Headphone Amplifier-Decora panel with user level control -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-SH1C MSRP: $333.35

Application/Usage: Headphone

Quick Quote View Details

RDL - Stereo Headphone Amplifier-stainless Decora panel with user level control

Model: DS-SH1M MSRP: $276.44

Quick Quote View Details

RDL - Stereo Headphone Amplifier-stainless Decora panel with user level control -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-SH1MC MSRP: $326.44

Quick Quote View Details

RDL - 2 Watt Decora-Style 8 Ohm Loudspeaker-Stainless Steel

Model: DS-SP1A MSRP: $144.89

The D SERIES-SP1A is a compact 8 ohm loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. The driver is constructed of materials found in premium larger speakers. The unique steel enclosure provides full ba...

Quick Quote View Details

RDL - 3.5 Watt Decora Audio Power Amplifier-Stainless (Compatible with Guest Room Audio System)

Model: DS-TPA1A MSRP: $306.75

The -TPA1A modules are two pair audio amplifier modules compatible with RDL Format A twisted pair products. Each -TPA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack. The left and right audio signals received on pairs B a...

Quick Quote View Details

RDL - 3.5 Watt Decora Audio Power Amplifier-Stainless (Compatible with Guest Room Audio System) -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPA1AC MSRP: $356.75

Quick Quote View Details

RDL - Active Single-Pair Receiver-Twisted Pair Format-A-XLR mic/line output-Stainless

Model: DS-TPR1A MSRP: $311.52

The D SERIES-TPR1A modules are single-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equi...pment. The -TPR1A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR1A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR1A features a black front-panel laminate. The DS-TPR1A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPR1A modules feature an XLR output jack. A rear-panel switch set during installation determines which of the three FORMAT-A pairs is buffered to feed the module output. The audio signal received from the selected pair of the RJ45 INPUT jack feeds the XLR audio output jack. The output level from the XLR jack is set to either MIC or LINE level during installation using a rear-panel switch.This module receives signal from only one cable pair, so the D SERIES-TPR1A modules have a second RJ45 jack to connect cables to additional receiver modules. Two other single-pair receivers may be chained to the second RJ45 jack, or a single two-pair receiver may be connected. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPR1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Mic or Line Level XLR Output
Switch-Selectable Output Level on Rear Panel
Switch Selects which Pair (A, B or C) Feeds the Output

Quick Quote View Details

RDL - Active Single-Pair Receiver-Twisted Pair Format-A-XLR mic/line output-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPR1AC MSRP: $361.52

Quick Quote View Details

RDL - Active Two-Pair Receiver-Twisted Pair Format-A-stereo phono jack outputs-Stainless

Model: DS-TPR2A MSRP: $325.32

The D SERIES-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipme...nt. The -TPR2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR2A features a black front-panel laminate. The DS-TPR2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPR2A modules feature two RCA phono jack outputs, one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level.This module receives signal from only two cable pairs, so the D SERIES-TPR2A modules have a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPR2A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Two Unbalanced -10 dBV Phono Jack Audio Outputs
L (Left) Output From Pair B; R (Right) From Pair C
Signal and Power Pair Pass-Through on RJ45s

Quick Quote View Details

RDL - Active Two-Pair Receiver-Twisted Pair Format-A-stereo phono jack outputs-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPR2AC MSRP: $375.32

Number of Loaded Sockets: 2
Total Number of Sockets: 2
Color Family: Other

Quick Quote View Details

RDL - Active Three-Pair Receiver-Twisted Pair Format-A-XLR & stereo phono out-Stainless

Model: DS-TPR3A MSRP: $346.23

The D SERIES-TPR3A modules are three-pair audio receiving modules compatible with RDL® Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external ...equipment. The -TPR3A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR3A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR3A features a black front-panel laminate. The DS-TPR3A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPR3A modules feature an XLR audio output and two RCA phono jack outputs, one for the left channel and one for the right channel. The audio signal received from pair A of the RJ45 INPUT jack feeds the XLR audio output jack. The output level from the XLR jack is set to either MIC or LINE level during installation using a rear-panel switch. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the RCA output jacks at the standard -10 dBV consumer level.Although the D SERIES-TPR3A modules access signals from all three cable pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products.The D SERIES-TPR3A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Number of Loaded Sockets: 4
Total Number of Sockets: 4
Mount Type: Wall Mount

Quick Quote View Details

RDL - Active Three-Pair Receiver-Twisted Pair Format-A-XLR & stereo phono out-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPR3AC MSRP: $396.23

Quick Quote View Details

RDL - Three Input Format-A Source Selector-SS

Model: DS-TPRX3A MSRP: $377.93

The D SERIES-TPRX3A is a three-pair audio receiving and switching module compatible with RDL Format-A twisted pair products. Three audio sources are available, corresponding to the three signal pairs A, B and C. The front panel of the -TPRX3A fe...atures three pushbuttons, each corresponding to one of three inputs. When a button is pushed, the corresponding audio input is fed to the output and any previously selected source is shut off. Only one source may be selected at a time. If the button for a selected source is pushed again, all inputs are turned off. An LED adjacent to each button shows which source is selected.When a -TPRX3A is not being used, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity when a button is pushed. In the event of power loss, internal non-volatile memory stores the last source selected. When power is restored, the -TPRX3A will return to the source that was active when power was lost.The D SERIES-TPRX3A was designed for absolute silent switching of audio signals. It provides a balanced line-level output that may be connected unbalanced.The -TPRX3A features bridging inputs, allowing it to be connected to the LOOP OUT jack of other receivers. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receivers for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio monitoring systems using RDL FORMAT-A products.The -TPRX3A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the INPUT RJ45 jack. The -TPRX3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable.The D SERIES-TPRX3A remote controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Use them with RDL wall-mounted accessories as part of a complete audio/video system.

Product Features:

Remote Selection from 3 Sources that Correspond to 3 Format-A Pairs
Single-Button Selection for Each Source
LED Indication

Quick Quote View Details

RDL - Three Input Format-A Source Selector-SS -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPRX3AC MSRP: $427.93

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-XLR mic input w phantom-Stainless

Model: DS-TPS1A MSRP: $309.83

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-XLR mic input w phantom-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPS1AC MSRP: $359.83

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-stereo phono jack inputs-Stainless

Model: DS-TPS2A MSRP: $297.25

The D SERIES-TPS2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The... -TPS2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS2A features a black front-panel laminate. The DS-TPS2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPS2A modules feature two RCA phono jack inputs, one for the left channel source and one for the right channel source. These inputs are designed to receive standard -10 dBV consumer level signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. The buffered left and right inputs are routed to output cable pairs B and C.These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. The D SERIES-TPR1A modules have a second RJ45 jack for an input cable. One single-pair sender may be chained with the -TPS2A. A single-pair sender must be set to feed pair A if it is connected together with the -TPS2A. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPS2A may be powered directly from a 24 Vdc power supply using the detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Two Unbalanced -10 dBV Phono Jack Audio Inputs
Left (L) Input Feeds Pair B; Right (R) Feeds Pair C
Signal and Power Pair Pass-Through on RJ45 Jacks

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-stereo phono jack inputs-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPS2AC MSRP: $347.25

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR microphone & stereo Mini-jack in-Stainless

Model: DS-TPS2AM MSRP: $296.95

The D SERIES-TPS2AM modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. Th...e -TPS2AM models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS2AM features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS2AM features a black front-panel laminate. The DS-TPS2AM is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPS2AM modules features an XLR microphone input and a stereo Mini-jack input summed to mono. The unbalanced Mini-jack inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The buffered Mini-jack input is routed to output cable pair B.The D SERIES-TPS2AM may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS2AM may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Mini-Jack -10 dBV Stereo Line Input Summed to Mono
MIC Feeds Pair A; Mini-jack Feeds Pair B
Remote Powering through Twisted Pair Cable

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR microphone & stereo Mini-jack in-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPS2AMC MSRP: $346.95

Color Family: Other
Product Color: Stainless
Application/Usage: Microphone

Quick Quote View Details

RDL - Active Three-Pair Sender-Twisted Pair Format-A-XLR mic & stereo phono in-Stainless

Model: DS-TPS3A MSRP: $315.60

Quick Quote View Details

RDL - Active Three-Pair Sender-Twisted Pair Format-A-XLR mic & stereo phono in-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPS3AC MSRP: $365.60

Quick Quote View Details

RDL - Passive Single-Pair Sender-Twisted Pair Format-A-stereo phono jack inputs-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPS6AC MSRP: $196.93

Quick Quote View Details

RDL - Passive Single-Pair Sender-Twisted Pair Format-A-Mini-Jack Input-Stainless

Model: DS-TPS7A MSRP: $146.93

The -TPS7A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features a single stereo mini-jack intended for stereo consumer line level audio sources. A studio-quality transformer prov...

Quick Quote View Details

RDL - Passive Single-Pair Sender-Twisted Pair Format-A-Mini-Jack Input-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPS7AC MSRP: $196.93

Quick Quote View Details

RDL - Format-A Multiple Location Audio Sender-Stainless Steel (Compatible with Guest Room Audio System) -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPS8AC MSRP: $319.17

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-Mini-Jack & Stereo RCA In-Stainless

Model: DS-TPSL1A MSRP: $310.06

The -TPSL1A modules are single pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TP...

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-Mini-Jack & Stereo RCA In-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPSL1AC MSRP: $360.06

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR Microphone & Stereo RCA In-Stainless

Model: DS-TPSL2A MSRP: $314.69

The -TPSL2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources.The -TPSL2A... modules feature an XLR microphone input and two RCA phono jack inputs summed to mono. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The summed left and right line-level inputs are routed to output cable pair B.These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. One single-pair sender may be chained with the -TPSL2A. A single-pair sender must be set to feed pair C if it is connected together with the -TPSL2A. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The -TPSL2A may be powered directly from a 24 Vdc power supply using the detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPSL2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Microphone XLR Input with Phantom
Switch-Selectable Mic Gain on Rear Panel
Two Unbalanced -10 dBV Phono Jack Line Inputs

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR Microphone & Stereo RCA In-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPSL2AC MSRP: $364.69

Quick Quote View Details

RDL - Active Two-Pair Sender Dual Microphone Preamplifier-Format-A-Stainless

Model: DS-TPSM2A MSRP: $457.26

Quick Quote View Details

RDL - Active Two-Pair Sender Dual Microphone Preamplifier-Format-A-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPSM2AC MSRP: $507.26

Quick Quote View Details

RDL - XLR 3-pin Female & 3-pin Male on D Plate-Terminal block connections-Stainless Steel

Model: DS-XLR2 MSRP: $41.11

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Female & 3-pin Male on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-XLR2C MSRP: $91.11

Quick Quote View Details

RDL - Dual XLR 3-pin Female Jacks on D Plate-Terminal block connections-Stainless Steel

Model: DS-XLR2F MSRP: $41.18

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - Dual XLR 3-pin Female Jacks on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-XLR2FC MSRP: $91.18

Quick Quote View Details

RDL - Dual XLR 3-pin Male Jacks on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-XLR2MC MSRP: $89.08

Quick Quote View Details

RDL - XLR 3-pin Female Jack on D Plate-Terminal block connections-Stainless Steel

Model: DS-XLR3F MSRP: $35.46

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Female Jack on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-XLR3FC MSRP: $85.46

Quick Quote View Details

RDL - XLR 3-pin Male Jack on D Plate-Terminal block connections-Stainless Steel

Model: DS-XLR3M MSRP: $35.46

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Male Jack on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-XLR3MC MSRP: $85.46

Color Family: Gray
Product Color: Stainless Steel

Quick Quote View Details

Atlas - Desk Stand 1#BS Wishbone 3" Chr/E

Model: DS14 MSRP: $77.99

Professionally Styled Microphone Desk Stand Includes Die-cast "wishbone" Shaped Base. Professionally styled stand includes die-cast "wishbone" shaped base. Finished in ebony and features 3" high chrome tubing.

microphone stand - Built to fit your needs and keep your equipment safe and organized
High quality cast iron construction ensure permanence and durability
Weighted bases provide maximum stability

Quick Quote View Details

Atlas - Desk Stand RG 1#BS 4" Shk Mnt EB

Model: DS2 MSRP: $84.99

Low silhouette stand features an integral tension variable mount to reduce conductivity of external mechanical vibrations. High-stability, die-cast metal base with protective pads includes notched area for convenient placement of cards or pens. ...

Quick Quote View Details

Kramer - Mini Digital Sound Processor

Model: DSP-1 MSRP: $282.00

Quick Quote View Details

Kramer - 6x2 PoE Audio Matrix with DSP and AEC

Model: DSP-62-AEC MSRP: $940.00

DSP-62-AEC is a member of the Kramer XSPerience family of DSP products. DSP-62-AEC is an advanced, professional 6 x 2 audio matrix switcher that includes multi-channel DSP, AEC (Acoustic Echo Cancellation), HDMI de-embedding, and class compliant... USB audio interface. The comprehensive and user-friendly graphic interface makes configuring every detail of your audio system intuitive and easy. Advanced Audio Matrix Switcher - Professional, studio grade signal conversion technology, Including the latest generation 32-bit advanced Digital Analog Converter architecture to achieve excellent dynamic performance and improved tolerance to clock jitter. Maintains the quality of the original audio signal with selectable sampling rates up to 96 kHz. Flat frequency response, unmatched sonic performance, excellent signal to noise ratio, and extraordinarily low distortion levels. Wide Range of I/O Formats - Includes 2 HDMI inputs, 1 unbalanced & 4 balanced analog audio inputs, 2 balanced analog audio outputs, 1 HDMI output, and 1 bidirectional USB plug & play audio port. Reliable PoE (Power over Ethernet) Powering - Accepts power from a remote PoE provider with optional mains powering from connected power adapter. Multi-Channel Processing - Provides DSP (Digital Sound Processing) that enables simultaneous processing of all input and output signals. Teleconference Optimized - Features AEC (Acoustic Echo Cancellation), that prevents the microphone from picking up the far-end echoed speech, so you only share the audio spoken directly into the microphone. Max. Video Resolution - 4K@60Hz (4:4:4). Intuitive and Comprehensive Configuration and Control - Via a powerful, user-friendly graphic interface, set volume (gain and attenuation) and DSP per input; execute routing and select line in, mic in, phantom power or line out on each port; configure master level and more. Control signal routing, volume and other basic settings using API commands via RS-232 communication transmitted by a PC, touch screen system or other serial controller. Audio De-embedding - De-embeds the audio signal from the HDMI input for routing to any of the outputs. Programmable - Supports up to 10 global presets plus 10 mixer snapshot presets. Easy, Cost-Effective Maintenance - LED indicators for main power, line in/out, mic in, clipping, and HDMI input selection, enable easy local maintenance and troubleshooting. Local firmware upgrade via the USB type-B port ensures lasting, field-proven deployment. Easy Installation - Compact DemiTOOLS® fan-less enclosure for surface mounting or side-by-side mounting of 2 units in a 1U rack space with the recommended rack adapter.

Product Features:

Multi-Channel DSP
AEC (Acoustic Echo Cancellation)
Intuitive and Comprehensive Configuration and Control

Quick Quote View Details

Kramer - 6x2 Digital Sound Processor with HDBT2.0 for USB Camera

Model: DSP-62-UC MSRP: $1335.00

DSP−62−UC is a member of the Kramer XSPerience family of DSP products. DSP−62−UC is an advanced, professional 6 x 2 audio matrix switcher that includes multi−channel DSP, AEC (Acoustic Echo Cancellation), HDMI de−embedding, and class compliant U...

Quick Quote View Details

Toa - AM/FM Tuner- 40 Presets- Digital Display- Black (1U)

Model: DT-940 UL MSRP: $714.00

The DT-940 radio tuner is designed for exclusive use with TOA's 900 series amplifiers. It is capable of receiving FM stereo broadcast and storing a total of 40 FM and AM stations. With the use of an optional rack mounting bracket, it c...

Quick Quote View Details

Atlas - **PACK OF 2** 2'x2' Lay In Speaker Adapter Kit

Model: DT12-2X2ADP MSRP: $215.98

Accessory kit converts the DT12 and IDT12(-CK) into a 2'x2' lay in speaker.

Converts DT12 Speaker to 2'x2'
DT12 Sold Separately
US and Foreign Patents Pending

Quick Quote View Details

Atlas - Flush Mount Speakers

Model: DT22 MSRP: $163.99

Installer friendly Atlas Sound DT22 provides clear paging and background music in a labor saving package. Ideal for use in shopping malls, department stores, and anywhere large quantities of loudspeakers are to be utilized. The Atlas Sound DT22 ...

Quick Quote View Details

RDL - STICK-ON Series Detachable Terminal Block

Model: DTB MSRP: $11.63

Quick Quote View Details

Nureva - HDL410 audio conferencing system, Black (Kit B1+B2) TAA compliant - CA

Model: DUAL-HDL410-B-CA MSRP: $9499.00

Quick Quote View Details

Nureva - HDL410 audio conferencing system, White (Kit W1 + W2)

Model: DUAL-HDL410-W MSRP: $8499.00

Getting pro audio performance in large spaces doesn’t need to be complicated (don’t let anyone tell you differently). The HDL410 offers advanced processing power and premium features for rooms up to 35' x 55' (10.7 x 16.8 m), without the cost an...

Quick Quote View Details

Nureva - HDL410 audio conferencing system, White (Kit W1 + W2) TAA compliant - CA

Model: DUAL-HDL410-W-CA MSRP: $9499.00

Getting pro audio performance in extra-large spaces doesn’t need to be complicated (don’t let anyone tell you differently). The HDL410 offers advanced processing power and premium features for rooms up to 35' x 55' (10.7 x 16.8 m), without the c...

Quick Quote View Details

Yamaha - Yamaha DUGAN-MY16 automatic mixing card for Yamaha digital mixers

Model: DUGAN-MY16 MSRP: $2457.00

Quick Quote View Details

ADJ - MINI CLAMP FOR DURA TRUSS

Model: DURA CLAMP MSRP: $7.00

The Dura Clamp from American DJ is a heavy duty clamp for lighting fixtures under 20lbs. It's specially designed for the Dura Truss System. Bring safety and stability to your performance with this clamp. It tightens down securely to ensure you g...

Quick Quote View Details

ADJ - MINI CLAMP FOR DURA TRUSS

Model: DURA CLAMP BLACK MSRP: $7.00

The Dura Clamp from American DJ is a heavy duty clamp for lighting fixtures under 20lbs. It's specially designed for the Dura Truss System. Bring safety and stability to your performance with this clamp. It tightens down securely to ensure you g...

Quick Quote View Details

Audix - Flexible mini-gooseneck with spring loaded rim mounted clamp

Model: DVICE MSRP: $42.00

The DVICE is a Flexible mini-gooseneck with spring loaded rim mount clamp. Includes DCLIP plastic clip for D Series. Provided with all D Series mic packs.

Quick Quote View Details

Audix - Flexible mini-gooseneck with spring loaded rim mounted clamp

Model: DVICEMICRO MSRP: $48.00

Spring loaded DVICE rim mount clip designed specifically for the MicroD and the Micros (12mm body). The clip features a flexible gooseneck that will adjust for height and position and provide strain relief for the cable. The microphone is held i...

Quick Quote View Details

Sony - Sony DVPSR210P DVD Player - Black

Model: DVPSR210P

The Sony Progressive Scan DVD Player is a versatile entertainer that offers a progressive output of 480p, so your DVDs will be shown in a single frame and look smoother and clearer. Ideal for pairing with an HDTV, this DVD player also offers fas...

Quick Quote View Details

Williams Sound - Single-unit power supply for Digi-Wave DLT transceivers and DLR

Model: DW ACC PAC MSRP: $41.00

Quick Quote View Details

Williams Sound - Single-unit Psply for Digi-Wave DLT 400 transand;or DLR 400 RCH rec

Model: DW ACC PAC4 MSRP: $44.00

Quick Quote View Details

Williams Sound - Digi Wave ACM 6 User Production Intercom System

Model: DW SYS2ACM MSRP: $7145.00

The Digi-Wave Advanced Comms Module (ACM) 6-person system is the ultimate solution for portable intercom in small broadcasts, theater productions, and live events. Offering up to 16 hours of battery life per charge, it supports uninterrupted, al...l-day use, making it the perfect choice for dynamic, fast-paced environments. Enjoy unparalleled mobility and flexibility – Digi-Wave ACM is a fully portable, full-duplex wireless intercom solution. Its unique Flexible Access Point feature allows users to stay connected with their team without being tethered to a base station. This enables any centralized device within the system to act as the access point – maximizing the overall range of the system and enabling flexibility. Easily initiate All-Call intercom from designated devices with a push of a button. This is great for stage managers, broadcast directors, and event coordinators to notify crew of things such as stage cues, the end of the commercial break, or emergency announcements. Need multiple people to initiate All-Call function? Digi-Wave ACM allows control units to choose which units have all-call capability. Designed with efficiency and ease of use in mind, the Digi-Wave ACM systems can be divided into up to 4 subgroups, allowing each team to have an individual communication line with just their team i.e. Lights, Camera, Stage, and Security. This setup allows leaders to effortlessly switch between subgroups for targeted communication. Great for large teams that need separate communication lines with smaller groups. Customize these subgroup names by using the prepopulated names or by using any 6-letter custom name. Flexible programming allows settings to be adjusted online – or offline by designating a separate unit as a control unit. Administrators can conveniently program all system settings offline using the control function, making updates to the system without interrupting active communication.

Product Features:

Fully Mobile, No Base Station. Digi-Wave ACM is a fully portable, full duplex, Two Way Communication System providing users complete flexibility to go where they are needed and remain in communication with their team.
Flexible Access Point. Unlike most wireless intercom devices in the market which use an access point to connect units, Digi-Wave ACM’s flexible access point (Main Sync feature) enables users to choose any device in the system to act as the digital access p
All Call Function. This function enables one or several leaders to easily communicate with all subgroups.

Quick Quote View Details

Williams Sound - Digi Wave ACM 12 User Production Intercom System

Model: DW SYS3ACM MSRP: $13600.00

Quick Quote View Details

Williams Sound - Digi-Wave Connect. Audio BO box Digi-Wave DLT 400 trans and DLR 400 RCH

Model: DWD 401 MSRP: $433.00

Digi-Wave Connect is an analog audio cable converter box that sends line level audio to and from an existing Digi-Wave 400 system.

Quick Quote View Details

Williams Sound - Digi-Wave 400 Wireless Intercom for up to four usersck

Model: DWS COM 4 400 MSRP: $3231.00

Digi-Wave 400 Series Wireless Intercom System for up to four participants.System Includes(4) DLT 400 transceivers(4) MIC 144 headset microphones(4) DWS ACC PAC4(1) CCS 029 DW system carry case(1) CCS 061 GR grey silicone skin(3) CCS 061 BK black...

Quick Quote View Details

Williams Sound - Digi-Wave 400 Series Wireless Intercom Sys up to six participants

Model: DWS COM 6 400 MSRP: $4897.50

Digi-Wave 400 Series Wireless Intercom System for up to six participants.System Includes(6) DLT 400 transceivers(6) MIC 144 headset microphones(6) DW ACC PAC4(1) CCS 056 DW 11 system carry case(1) CCS 061 GR grey silicone skin(5) CCS 061 BK blac...

Quick Quote View Details

Williams Sound - Digi-Wave 400 Series Wireless Intercom Sys up to 6 participants hi noise

Model: DWS COM 6 PRO 400 MSRP: $5414.50

Digi-Wave 400 Series Wireless Intercom System for up to six participants in high-noise environments.System Includes(6) DLT 400 transceivers(6) MIC 157 headset mics(6) DW ACC PAC4(1) CCS 042 heavy-duty system carry case(1) CCS 061 GR grey silicon...

Quick Quote View Details

Williams Sound - Digi-Wave 400 Series Wireless Intercom System for up to eight

Model: DWS COM 8 400 MSRP: $6397.00

Digi-Wave 400 Series Wireless Intercom System for up to eight participants.System Includes(8) DLT 400 transceivers(8) MIC 144 headset microphones(8) DW ACC PAC4(1) CCS 056 DW 11 system carry case(1) CCS 061 GR grey silicone skin(7) CCS 061 BK bl...

Quick Quote View Details

Williams Sound - Digi-Wave 400 Series Wireless Intercom System for up to eight

Model: DWS COM 8 PRO 400 MSRP: $7639.50

Digi-Wave 400 Series Wireless Intercom System for up to eight participants.System Includes(8) DLT 400 transceivers(8) MIC 157 headset microphones(1) CHG 412 12-bay charger(8) DW ACC PAC4(1) CCS 042 heavy-duty system carry case(7) CCS 061 GR grey...

Quick Quote View Details

Williams Sound - Digi-Wave 400 Series Interpretation System for one presenter and 10

Model: DWS INT 2 400 ALK MSRP: $4057.00

Digi-Wave 400 Series Interpretation System for one presenter and 10 listeners.System Includes(1) DLT 400 transceiver(10) DLR 400 ALK receivers(1) MIC 144 headset microphone(10) EAR 022 surround earphones(10) BAT 010-2 AAA alkaline batteries(1) D...

Quick Quote View Details

Williams Sound - Digi-Wave 400 Series Interpretation System for two presenters and 20

Model: DWS INT 3 400 ALK MSRP: $8177.50

Digi-Wave 400 Series Interpretation System for two presenters and 20 listeners.System Includes(2) DLT 400 transceivers(20) DLR 400 ALK receivers(2) MIC 144 headset microphones(20) EAR 022 surround earphones(1) CHG 404 DW 4 slot charging bay(20) ...

Quick Quote View Details

Williams Sound - Rechargeable Digi-Wave 400 Series Rechargeable Interpretation

Model: DWS INT 4 400 RCH MSRP: $11193.50

Digi-Wave 400 Series Rechargeable Interpretation System for up to three presenters and 21 listeners.System Includes(3) DLT 400 transceivers(21) DLR 400 RCH receivers(3) MIC 144 headset microphones(21) EAR 022 surround earphones(2) CHG 412 PRO 12...

Quick Quote View Details

Williams Sound - Digi-Wave 400 Series Interpretation System for four languages plus

Model: DWS INT 5 400 ALK MSRP: $20200.50

Digi-Wave 400 Series Interpretation System for four languages plus floor.System Includes(5) DLT 400 transceivers(50) DLR 400 ALK receivers(4) MIC 158 headset microphones(50) EAR 022 surround earphones(1) CHG 412 12-bay charger(50) BAT 010-2 AAA ...

Quick Quote View Details

Williams Sound - Rechargeable Digi-Wave 400 Series Interpret Sys for four languages plus

Model: DWS INT 5 400 RCH MSRP: $24799.00

Digi-Wave 400 Series Interpretation System for four languages plus floor.System Includes(5) DLT 400 transceivers(50) DLR 400 RCH receivers(4) MIC 158 headset microphones(50) EAR 022 surround earphones(5) CHG 412 12-bay charger(1) CCS 054 carry c...

Quick Quote View Details

Williams Sound - Digi-Wave 400 Series Personal Communication System

Model: DWS PCS 2 400 MSRP: $1479.00

Digi-Wave Series 400 Personal Communication SystemSystem Includes(2) DLT 400 transceivers(2) MIC 144 headset microphones(1) DW ACC PAC4(1) CCS 043 system carry case(1) CCS 061 BK black silicone skin(1) CCS 061 GR grey silicone skin.

Quick Quote View Details

Williams Sound - Digi-Wave Personal Communication System

Model: DWS PCS 3 400 RCH MSRP: $1113.50

Digi-Wave Series 400 Personal Communication SystemSystem Includes(1) DLT 400 transceiver(1) DLR 400 RCH receiver(2) DWS ACC PAC4(1) MIC 190 lapel microphone(1) EAR 041 earphone(1) CCS 043 system carry case(1) CCS 061 GR grey silicone skin(1) CCS...

Quick Quote View Details

Williams Sound - Digi-Wave 400 Series Tour Guide System for one guide and up to 10

Model: DWS TGS 10 400 ALK MSRP: $4070.00

Digi-Wave 400 Series Tour Guide System for one guide and up to 10 listeners.System Includes(1) DLT 400 transceiver(10) DLR 400 ALK receivers(1) MIC 144 headset microphone(10) EAR 022 surround earphones(10) BAT 010-2 AAA alkaline batteries(1) DW ...

Quick Quote View Details

Williams Sound - Rechargeable Digi-Wave 400 Series Tour Guide Sys one guide and up to 11

Model: DWS TGS 11 400 RCH MSRP: $5602.50

Digi-Wave 400 Series Tour Guide System for one guide and up to 11 listeners.System Includes(1) DLT 400 transceiver(11) DLR 400 RCH receivers(1) MIC 144 headset microphone(11) EAR 022 surround earphones(1) CHG 412 PRO 12-bay charger in carry case...

Quick Quote View Details

Williams Sound - Digi-Wave 400 Series Tour Guide System for one guide and up to 20

Model: DWS TGS 20 400 ALK MSRP: $7072.00

Digi-Wave 400 Series Tour Guide System for one guide and up to 20 listeners.System Includes(1) DLT 400 transceiver(20) DLR 400 ALK receivers(1) MIC 144 headset microphone(20) EAR 022 surround earphones(20) BAT 010-2 AAA alkaline batteries(1) DW ...

Quick Quote View Details

Category

Brand

Digital Inverter Compressor

Type

Frequency Range

Bridge Element

Price

Receiver Type

Microphone Type

Polar Pattern

Number of Battery & Surge Outlets

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Sitemaps

Downloads