Radio Design Labs Products distributed by Almo ProAV

RDL - Consumer Input Jacks-Mono -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-CIJ3C MSRP: $195.65

Quick Quote View Details

Model: DS-CIJ3D MSRP: $173.67

The D/S-CIJ3D is the ideal choice in installations requiring stereo unbalanced line level audio sources to feed stereo balanced (or unbalanced) audio lines. The D/S-CIJ3D is a complete unbalanced line-level audio input module. The front panel fe...

Quick Quote View Details

RDL - Consumer Input Jacks-Stereo -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-CIJ3DC MSRP: $223.67

Quick Quote View Details

RDL - Single plate for standard and specialty connectors-Stainless

Model: DS-D1 MSRP: $33.18

Product Color: Stainless Steel
Product Material: Steel
Height: 4.1"

Quick Quote View Details

RDL - Single plate for standard and specialty connectors-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-D1C MSRP: $83.18

Quick Quote View Details

RDL - Single plate for standard and specialty connectors-Top Hole Position-Stainless Steel

Model: DS-D1T MSRP: $27.50

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Customizable Front-Panel Text

Quick Quote View Details

RDL - Single plate for standard and specialty connectors-Top Hole Position-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-D1TC MSRP: $77.50

Quick Quote View Details

RDL - Double plate for standard and specialty connectors-Stainless

Model: DS-D2 MSRP: $37.43

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Customizable Front-Panel Text

Quick Quote View Details

RDL - Double plate for standard and specialty connectors-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-D2C MSRP: $87.43

Quick Quote View Details

RDL - Double Type F Jack on D Plate-Stainless Steel

Model: DS-F MSRP: $31.58

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Customizable Front-Panel Text

Quick Quote View Details

RDL - Double Type F Jack on D Plate-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-FC MSRP: $81.58

Quick Quote View Details

RDL - Format-A Stereo Headphone Amplifier-Stainless Steel (Compatible with Guest Room Audio System)

Model: DS-HA1A MSRP: $241.32

The D SERIES-HA1A is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. Each -HA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender. The left and ...

Quick Quote View Details

RDL - Format-A Stereo Headphone Amplifier-Stainless Steel (Compatible with Guest Room Audio System) -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-HA1AC MSRP: $291.32

Quick Quote View Details

RDL - 3.5 Watt Audio Power and Headphone Amplifier-SS

Model: DS-HPA3 MSRP: $345.98

The D SERIES-HPA3 is a high efficiency 3.5 W power amplifier with one line input, an amplified output to drive a 4 or 8 ohm speaker and a separate headphone amplifier. The -HPA3 features a balanced line level input that may be connected unbalanc...

Quick Quote View Details

RDL - 3.5 Watt Audio Power and Headphone Amplifier-SS -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-HPA3C MSRP: $395.98

Quick Quote View Details

RDL - Microphone Input Assembly-XLR, Terminal block-Stainless

Model: DS-J1 MSRP: $98.74

The D SERIES-J1 is a complete microphone input panel assembly. Connections to the female front-panel XLR jack are made on a rear barrier block. Four terminals are provided: CASE GROUND, SHIELD (XLR pin 1), + (XLR pin 2) and - (XLR pin 3). The in...

Quick Quote View Details

RDL - Microphone Input Assembly-XLR, Terminal block-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-J1C MSRP: $148.74

Color Family: Other
Product Color: Stainless
Application/Usage: Microphone

Quick Quote View Details

RDL - Line Input Assembly-RCA jacks, Terminal block-Stainless

Model: DS-J2 MSRP: $98.29

The D SERIES-J2 is a complete unbalanced audio input panel assembly. The front panel features two phono jacks intended for mono or stereo consumer level sources. LEFT and RIGHT are combined and balanced through audio transformers configured to r...

Quick Quote View Details

RDL - Line Input Assembly-RCA jacks, Terminal block-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-J2C MSRP: $148.29

Quick Quote View Details

RDL - Mic/Line Input Assembly-XLR, RCA, Terminal block-Stainless

Model: DS-J3 MSRP: $102.27

The D SERIES-J3 is a complete audio input panel assembly. The front panel features a female XLR jack and two phono jacks. The XLR is connected directly to the rear-panel barrier block. The phono jacks are intended for mono or stereo consumer lev...

Quick Quote View Details

RDL - Mic/Line Input Assembly-XLR, RCA, Terminal block-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-J3C MSRP: $152.27

Application/Usage: Microphone

Quick Quote View Details

RDL - Mic/Line Input Assembly-XLR, Mini-jack, Terminal block-Stainless

Model: DS-J3M MSRP: $97.03

Quick Quote View Details

RDL - Mic/Line Input Assembly-XLR, Mini-jack, Terminal block-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-J3MC MSRP: $147.03

Quick Quote View Details

RDL - Mini-Jack Pass-Through Plate-Stainless

Model: DS-MJPT MSRP: $59.34

The D-MJPT is a Decora style wall plate with a mini-jack (3.5 mm, 1/8") input or output connector. The front-panel jack is directly connected to a second mini-jack on the rear of the D-MJPT. The panel is ideal for mounting in a wall or in an RDL...

Quick Quote View Details

RDL - Mini-Jack Pass-Through Plate-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-MJPTC MSRP: $109.34

Quick Quote View Details

RDL - Network Remote Control with LEDs-Dante-Stainless Steel

Model: DS-NLC1 MSRP: $525.28

The D SERIES-NLC1 is a remote control that provides volume control at single or multiple locations. The -NLC1 connects to a digital network that may include compatible RDL audio and control modules. Level is displayed on a 15 segment LED string....

Quick Quote View Details

RDL - Network Remote Control with LEDs-Dante-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-NLC1C MSRP: $519.61

Quick Quote View Details

RDL - Network Remote Control with Screen-Dante-Stainless Steel

Model: DS-NMC1 MSRP: $660.80

The D SERIES-NMC1 is a remote control that provides source selection and volume control at single or multiple locations.The -NMC1 connects to a digital network that may include compatible RDL audio and control modules as well as Dante devices fr...om RDL and other manufacturers. The unit is menu-driven using a full-color LCD display. Each -NMC1 operates as a Controller or Satellite control permitting up to eight units to work together to control sources or levels. Setup is accomplished in a browser session hosted by the -NMC1. The installer enables menus and submenus required to provide the desired end user control, with the option of customizing the screen menu and function names.Source Selection is uniquely powerful. Selecting a source on the screen menu sends a command to receive data on a particular Dante channel and simultaneously to route a specific channel from any Dante device on the network to the receiver. Each selection can also set the gain of the source and route that source to multiple amplifiers and set the operating level of the digital signal to each amplifier.* Up to eight Dante routing settings are possible for each source selected including an option to clear existing routings.Volume may be configured to adjust a group of Dante flows and/or to adjust each individual signal in the group separately. If individual attenuation levels are set to different values, the level offsets in dB are preserved while adjusting the group level. Audio Mute is provided on one button with an indicator on the screen.Each D-NMC1 is configured either as a Controller or a Satellite. When operating as the Controller, one or more satellite controls can be pointed at the Controller which arbitrates the requests and sends single commands to the devices the Controller is adjusting. When operating as a Satellite, it sends commands to a Controller which relays them to the controlled devices.When adjustments are not being made, the -NMC1 display is dimmed. It returns to normal intensity upon any button push. Each function may be configured to automatically lock after 30 seconds of inactivity. When a function is locked, a button push sequence is required to unlock that function. The unlock sequence is programmable by the installer and may be reprogrammed if required.The D-NMC1 provides a wide range of capabilities for setting and adjusting sources and volumes. Navigation arrows guide the end user through the selection choices in an intuitive and attractive interface that is powerful, yet simple to operate.

Product Features:

Pushbutton Remote Control
Full-Color LCD Display
Individual or Group Level Adjustment

Quick Quote View Details

RDL - Network Remote Control with Screen-Dante-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-NMC1C MSRP: $651.18

Quick Quote View Details

RDL - 3.5 Watt Decora Audio Amplifier-SS

Model: DS-PA3 MSRP: $330.63

The D SERIES-PA3 is a high efficiency 3.5 W power amplifier with two line inputs and an amplified output to drive a 4 or 8 ohm speaker. The -PA3 features a balanced line level input that may be connected unbalanced. The gain range will accommoda...

Quick Quote View Details

RDL - 3.5 Watt Decora Audio Amplifier-SS -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-PA3C MSRP: $380.63

Quick Quote View Details

RDL - Single Phono Jack on D Plate-Solder type-Stainless Steel

Model: DS-PHN1 MSRP: $27.92

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Customizable Front-Panel Text

Quick Quote View Details

RDL - Single Phono Jack on D Plate-Solder type-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-PHN1C MSRP: $77.92

Quick Quote View Details

RDL - Dual Phono Jacks on D Plate-Solder type-Stainless Steel

Model: DS-PHN2 MSRP: $31.58

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Customizable Front-Panel Text

Quick Quote View Details

RDL - Dual Phono Jacks on D Plate-Solder type-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-PHN2C MSRP: $81.58

Number of Gangs: 1
Mount Type: Wall Mount
Number of RCA Ports: 2

Quick Quote View Details

RDL - Decora-Style Active Loudspeaker-Stainless Steel-User Level Adjust

Model: DS-PSP1 MSRP: $348.25

APPLICATION: The D SERIES-PSP1 is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. The input accepts either a -10 dBV unbalanced or a +4 dBu balanced signal on the rear-panel detachable...

Quick Quote View Details

RDL - Decora-Style Active Loudspeaker-Format-A-Stainless Steel-User Level Adjust

Model: DS-PSP1A MSRP: $348.25

The D SERIES-PSP1A is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. It is a single-pair audio amplifier module compatible with RDL Format A twisted pair products. The -PSP1A receives...

Quick Quote View Details

RDL - Decora-Style Active Loudspeaker-Format-A-Stainless Steel-Installer Level Adjust

Model: DS-PSP1AF MSRP: $348.25

APPLICATION: The D SERIES-PSP1AF is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. It is a single-pair audio amplifier module compatible with RDL Format A twisted pair products. The -...

Quick Quote View Details

RDL - Decora-Style Active Loudspeaker-Stainless Steel-Installer Level Adjust

Model: DS-PSP1F MSRP: $348.25

APPLICATION: The D SERIES-PSP1F is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. The input accepts either a -10 dBV unbalanced or a +4 dBu balanced signal on the rear-panel detachabl...

Quick Quote View Details

RDL - Remote Audio Mixing Control-Stainless

Model: DS-RC2 MSRP: $209.62

The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel. They function exactly as ...

Quick Quote View Details

RDL - Remote Audio Mixing Control-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RC2C MSRP: $259.62

Quick Quote View Details

RDL - Remote Audio Mixing Control with Muting-Stainless

Model: DS-RC2M MSRP: $248.42

The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel. They function exactly as ...

Quick Quote View Details

RDL - Remote Audio Mixing Control with Muting-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RC2MC MSRP: $298.42

Quick Quote View Details

RDL - 2 Channel Remote Control for STICK-ONs-stainless steel

Model: DS-RC2ST MSRP: $195.88

The front panel of the DS-RC2ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2. An LED adjacent to each button shows ...

Quick Quote View Details

RDL - 2 Channel Remote Control for STICK-ONs-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RC2STC MSRP: $245.88

Quick Quote View Details

RDL - Remote Audio Mixing Control-Stainless

Model: DS-RC3 MSRP: $231.32

The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel. They function exactly as ...

Quick Quote View Details

RDL - Remote Audio Mixing Control-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RC3C MSRP: $281.32

Quick Quote View Details

RDL - Remote Audio Mixing Control with Muting-Stainless

Model: DS-RC3M MSRP: $287.28

The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel. They function exactly as ...

Quick Quote View Details

RDL - Remote Audio Mixing Control with Muting-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RC3MC MSRP: $337.28

Quick Quote View Details

RDL - 4 Channel Remote Control for RU-ASX4D and RU-ASX4DR-Stainless

Model: DS-RC4M MSRP: $212.43

The D SERIES-RC4M is a remote control that provides source selection at single or multiple locations. The -RC4M is designed to directly connect to an RDL® 4-channel switching module controlled by external momentary pushbuttons. The front pan...

Quick Quote View Details

RDL - 4 Channel Remote Control for RU-ASX4D and RU-ASX4DR-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RC4MC MSRP: $262.43

Quick Quote View Details

RDL - 4 Channel Remote Control for RACK-Ups-stainless steel

Model: DS-RC4RU MSRP: $195.88

The D-RC4RU is a wall-box mounted remote module designed to directly control an RDL RU-SX4A Audio Switcher Module. The RU-SX4A provides solid state switching of one of four balanced/unbalanced audio inputs to a single balanced/ unbalanced audio ...

Quick Quote View Details

RDL - 4 Channel Remote Control for RACK-Ups-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RC4RUC MSRP: $245.88

Quick Quote View Details

RDL - 4 Channel Remote Control for ST-SX4-stainless steel

Model: DS-RC4ST MSRP: $195.50

The DS-RC4ST is a wall-box mounted remote module designed to directly control an RDL ST-SX4 Audio Switcher Module. The ST-SX4 provides solid-state switching of one of four unbalanced audio inputs to a single unbalanced audio output. The DS-RC4ST...

Quick Quote View Details

RDL - 4 Channel Remote Control for ST-SX4-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RC4STC MSRP: $245.50

Quick Quote View Details

RDL - Remote Channel Selector-4 Channels-controls RU-ASX4D/R-stainless steel

Model: DS-RCS4 MSRP: $195.69

The DS-RCS4 is the ideal choice where sources are to be selected from a single or from multiple remote control locations, and visual indication is desired.The DS-RCS4 is designed to directly interface with RDL control modules, such as the RACK-U...

Quick Quote View Details

RDL - Remote Channel Selector-4 Channels-controls RU-ASX4D/R-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RCS4C MSRP: $245.69

Quick Quote View Details

RDL - Room Control for RCX-5C Room Combiner-Decora Stainless

Model: DS-RCX1 MSRP: $381.50

Quick Quote View Details

RDL - Rotary Level Control-Rotary Encoder-Decora Stainless

Model: DS-RCX10R MSRP: $412.02

Mounts in individual room to control audio level
Ideal for systems not using a music source
Optical rotary encoder with LED readout for setting audio level

Quick Quote View Details

RDL - Rotary Level Control-Rotary Encoder-Decora Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RCX10RC MSRP: $462.02

Mounts in individual room to control audio level
Ideal for systems not using a music source
Optical rotary encoder with LED readout for setting audio level

Quick Quote View Details

RDL - Room Control for RCX-5C Room Combiner-Decora Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RCX1C MSRP: $431.50

Quick Quote View Details

RDL - Room Control for RCX-5C Room Combiner-Decora Stainless

Model: DS-RCX2 MSRP: $435.19

Mounts in individual room to control source and level
Long life pushbuttons for Music or Local / Combined Selection
Optical rotary encoder with LED readout for setting audio level

Quick Quote View Details

RDL - Room Control for RCX-5C Room Combiner-Decora Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RCX2C MSRP: $485.19

Quick Quote View Details

RDL - Remote Level Control-Rotary Optical Encoder-stainless steel

Model: DS-RLC10 MSRP: $424.38

The D SERIES-RLC10 is a rotary remote level control that provides user adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-term trouble-free and noise...-free operation. These controls directly connect to any RDL VCA and OEM equipment with 0 to 10 Vdc ramp inputs.A single -RLC10 may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the MASTER. The MASTER mode causes this control to drive the 0 to 10 Vdc ramp output and to monitor its pulse terminals in case any other -RLC10 controls are connected.As many as nine additional -RLC10 controls may be wired in parallel with the MASTER control using UTP cable (CAT5, CAT6 or equivalent). The rear-panel MODE switch on each additional remote control is set to SLAVE mode.Operation is the same for a single control, or for each control connected in a multiple control point installation. The 0 to 10 Vdc ramp voltage is incremented up or down when the front-panel knob is rotated. Acceleration is provided so the rate of change is faster when the knob is rotated more rapidly, yielding a responsive feel and rapid elimination of acoustic feedback. The LED ring display encircling the control knob operates as a virtual pointer. When an -RLC10 is not being adjusted, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity during adjustment.In the event of power loss, internal non-volatile memory stores the last level value. When power is restored, the 0 to 10 V output will return to the operating level present when power was lost.Multiple -RLC10 controls set to the SLAVE MODE may be connected to an RDL RU-VCA2A or RU-VCA6A, utilizing the VCA as the ramp generator. This connection is also possible with OEM equipment accepting open-collector pulses that are compatible with the -RLC10 output pulse rate and width.The -RLC10 controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Connections are made through a rear panel detachable terminal block.All the D SERIES-RLC10 features combine to make it the ideal choice for single point or multiple location remote level control in high quality systems. Use them with any RDL VCA module, or side-by-side with other RDL remote accessories as part of a complete audio/video system

Product Features:

Rotary Optical Encoder Remote Level Control
Single or Multiple Control Locations
Up To Ten Remote Control Locations

Quick Quote View Details

RDL - Remote Level Control-Rotary Optical Encoder-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC10C MSRP: $474.38

Quick Quote View Details

RDL - Remote Level Controller-0 to 10 k Ohm-stainless steel

Model: DS-RLC10K MSRP: $71.42

The RLC10K is the ideal companion to the RDL VCA modules where levels are to be controlled from a single remote location. It is designed to directly interface with the 3-wire control input of the VCA module. The RLC10K contains a high-quality 10...

Quick Quote View Details

RDL - Remote Level Controller-0 to 10 k Ohm-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC10KC MSRP: $121.42

Quick Quote View Details

RDL - Remote Level Control with Muting-stainless steel

Model: DS-RLC10KM MSRP: $195.32

The RLC10KM is the ideal companion to RDL VCA modules where levels are to be controlled from a single remote location and pushbutton muting is desired. It is designed to directly interface with the 3 wire control input of an RDL VCA module. A si...

Quick Quote View Details

RDL - Remote Level Control with Muting-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC10KMC MSRP: $245.32

The RLC10KM is the ideal companion to RDL VCA modules where levels are to be controlled from a single remote location and pushbutton muting is desired. It is designed to directly interface with the 3 wire control input of an RDL VCA module. A si...

Quick Quote View Details

RDL - Remote Level Control with Muting-Rotary Optical Encoder-stainless steel

Model: DS-RLC10M MSRP: $428.79

The D SERIES-RLC10M is a rotary remote level control with pushbutton muting that provides user adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-ter...m trouble-free and noise-free operation. These controls directly connect to any RDL VCA and OEM equipment with 0 to 10 Vdc ramp inputs.A single -RLC10M may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the MASTER. The MASTER mode causes this control to drive the 0 to 10 Vdc ramp output and to monitor its pulse terminals in case any other -RLC10M controls are connected.As many as nine additional -RLC10M controls may be wired in parallel with the MASTER control using UTP cable (CAT5, CAT6 or equivalent). The rear-panel MODE switch on each additional remote control is set to SLAVE mode.Operation is the same for a single control, or for each control connected in a multiple control point installation. The 0 to 10 Vdc ramp voltage is incremented up or down when the front-panel knob is rotated. Acceleration is provided so the rate of change is faster when the knob is rotated more rapidly, yielding a responsive feel and rapid elimination of acoustic feedback. The LED ring display encircling the control knob operates as a virtual pointer. When an -RLC10M is not being adjusted, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity during adjustment.Upon power-up or re-powering after a power loss, the 0 to 10 Vdc ramp will output either a preset level or the last level used. The power-up mode is stored when the control is installed. When programmed for the preset level mode, the user can store a new preset level by holding the MUTE button for more than 3 seconds.Multiple -RLC10M controls set to the SLAVE MODE may be connected to an RDL RU-VCA2A or RU-VCA6A, utilizing the VCA as the ramp generator. This connection is also possible with OEM equipment accepting open-collector pulses that are compatible with the -RLC10M output pulse rate and width.The -RLC10M controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Connections are made through a rear panel detachable terminal block. The MUTE pushbutton is a long-life switch mounted to provide protection from excessive frontal force.All the D SERIES-RLC10M features combine to make it the ideal choice for single point or multiple location remote level control with muting in high quality systems. Use them with any RDL VCA module, or side-by-side with other RDL remote accessories as part of a complete audio/video system.

Product Features:

Rotary Optical Encoder Remote Level Control
Single or Multiple Control Locations
Up To Ten Remote Control Locations

Quick Quote View Details

RDL - Remote Level Control with Muting-Rotary Optical Encoder-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC10MC MSRP: $478.79

Quick Quote View Details

RDL - Remote Level Controller-Ramp-stainless steel

Model: DS-RLC2 MSRP: $262.57

The DS-RLC2 is the ideal choice where levels are to be controlled from a single, or from multiple control locations, and visual level indication is desired.The DS-RLC2 is designed to directly interface with RDL control modules, such as the STICK...

Quick Quote View Details

RDL - Remote Level Controller-Ramp-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC2C MSRP: $312.57

Quick Quote View Details

RDL - Remote Level Controller-Preset Levels-stainless steel

Model: DS-RLC3 MSRP: $272.01

The DS-RLC3 is designed to directly interface with RDL control modules which feature a 0 to 10 Vdc control input utilizing an external 10 kΩ resistive control, such as the ST-VCA3, RU-VCA2A and RU-VA6A voltage controlled amplifiers. The DS...

Quick Quote View Details

RDL - Remote Level Controller-Preset Levels-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RLC3C MSRP: $322.01

Quick Quote View Details

RDL - DS-RN22 Wall-Mounted Bi-Directional Mic/Line Dante Interface 2x2

Model: DS-RN22 MSRP: $970.92

The D-RN22 is a complete wall-mounted Dante or AES67 audio network interface. It features two XLR mic or line inputs on the front panel and two balanced line outputs on a rear-panel detachable wiring block. The module is configured and adjusted ...using RDL CONSOLE or other network control software. The D-RN22 fits a standard US single-gang electrical box or an RDL WB-1U back box for installations in European or similar thinner walls. The D-RN22 is PoE powered and is available in multiple finishes with optional customized graphics.Mic/Line to Network SectionThe two XLR inputs are each converted to a separate Dante network transmit channel. Five gain settings are software-selectable for XLR inputs. Three gain settings are provided to match condenser or dynamic microphones. Two gain settings are provided to match standard line levels. P48 phantom voltage may be software enabled when an input is set for mic level.Network to Line SectionTwo Dante audio channels are converted to balanced line level feeding a rear-panel detachable wiring block. Each output provides +4dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a software-controlled attenuator adjustable in 1 dB steps to a maximum attenuation of 63 dB then OFF. The outputs may drive local power amplifiers or may feed additional XLR jacks mounted adjacent to the D-RN22 in a dual-gang box. Two XLR mic or line outputs may be provided using an RDL D-D2 equipped with two AMS-XLRMA jacks, available separately.Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.The D-RN22 is a professional grade product with RDL mic preamplifiers for studio quality fidelity and low noise performance, coupled through XLR jacks housed in a steel chassis with a powder-coated or stainless-steel Decora front plate.The D-RN22's superior performance specifications make it ideally suited to installations requiring network control and exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A. for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Single-Gang Dante or AES67 Network Interface for Two Audio Inputs and Two Audio Outputs
Two Front-Panel Mic/Line Inputs on Balanced XLR Jacks
Two Balanced Rear-Panel Outputs on Detachable Wiring Block

Quick Quote View Details

RDL - Remote Control Selector-stainless steel

Model: DS-RT2 MSRP: $195.88

The front panel of the DS-RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selectsON. An LED adjacent to each button shows which mode...

Quick Quote View Details

RDL - Remote Control Selector-stainless steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-RT2C MSRP: $245.88

Quick Quote View Details

RDL - Room Control Station for SourceFlex Distributed Audio System-SS

Model: DS-SFRC8 MSRP: $430.90

The D SERIES-SFRC8 Room Control Station is a SourceFlex listening station for wall mounting in a room, providing source selection and volume control from up to 8 audio sources. A numeric display shows the selected source. There are two line-leve...

Quick Quote View Details

RDL - Room Control Station for SourceFlex Distributed Audio System-SS -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-SFRC8C MSRP: $480.90

Quick Quote View Details

RDL - Audio Selector for SourceFlex Distributed Audio System-SS

Model: DS-SFRC8L MSRP: $316.77

The D SERIES-SFRC8L Audio Selector is a SourceFlex module for wall mounting in a room, providing source selection from up to 8 audio sources. A numeric display shows the selected source. There are two line-level audio outputs on the rear of the ...

Quick Quote View Details

RDL - Audio Selector for SourceFlex Distributed Audio System-SS -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-SFRC8LC MSRP: $366.77

Quick Quote View Details

RDL - Stereo Headphone Amplifier-Decora panel with user level control

Model: DS-SH1 MSRP: $283.35

The D/DS SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. The D/DS-SH1 is ideally suited to applications as diverse as language translation, museums, interview studios an...

Quick Quote View Details

RDL - Stereo Headphone Amplifier-Decora panel with user level control -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-SH1C MSRP: $333.35

Application/Usage: Headphone

Quick Quote View Details

RDL - Stereo Headphone Amplifier-stainless Decora panel with user level control

Model: DS-SH1M MSRP: $276.44

Quick Quote View Details

RDL - Stereo Headphone Amplifier-stainless Decora panel with user level control -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-SH1MC MSRP: $326.44

Quick Quote View Details

RDL - 2 Watt Decora-Style 8 Ohm Loudspeaker-Stainless Steel

Model: DS-SP1A MSRP: $144.89

The D SERIES-SP1A is a compact 8 ohm loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. The driver is constructed of materials found in premium larger speakers. The unique steel enclosure provides full ba...

Quick Quote View Details

RDL - 3.5 Watt Decora Audio Power Amplifier-Stainless (Compatible with Guest Room Audio System)

Model: DS-TPA1A MSRP: $306.75

The -TPA1A modules are two pair audio amplifier modules compatible with RDL Format A twisted pair products. Each -TPA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack. The left and right audio signals received on pairs B a...

Quick Quote View Details

RDL - 3.5 Watt Decora Audio Power Amplifier-Stainless (Compatible with Guest Room Audio System) -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPA1AC MSRP: $356.75

Quick Quote View Details

RDL - Active Single-Pair Receiver-Twisted Pair Format-A-XLR mic/line output-Stainless

Model: DS-TPR1A MSRP: $311.52

The D SERIES-TPR1A modules are single-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equi...pment. The -TPR1A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR1A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR1A features a black front-panel laminate. The DS-TPR1A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPR1A modules feature an XLR output jack. A rear-panel switch set during installation determines which of the three FORMAT-A pairs is buffered to feed the module output. The audio signal received from the selected pair of the RJ45 INPUT jack feeds the XLR audio output jack. The output level from the XLR jack is set to either MIC or LINE level during installation using a rear-panel switch.This module receives signal from only one cable pair, so the D SERIES-TPR1A modules have a second RJ45 jack to connect cables to additional receiver modules. Two other single-pair receivers may be chained to the second RJ45 jack, or a single two-pair receiver may be connected. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPR1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Mic or Line Level XLR Output
Switch-Selectable Output Level on Rear Panel
Switch Selects which Pair (A, B or C) Feeds the Output

Quick Quote View Details

RDL - Active Single-Pair Receiver-Twisted Pair Format-A-XLR mic/line output-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPR1AC MSRP: $361.52

Quick Quote View Details

RDL - Active Two-Pair Receiver-Twisted Pair Format-A-stereo phono jack outputs-Stainless

Model: DS-TPR2A MSRP: $325.32

The D SERIES-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipme...nt. The -TPR2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR2A features a black front-panel laminate. The DS-TPR2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPR2A modules feature two RCA phono jack outputs, one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level.This module receives signal from only two cable pairs, so the D SERIES-TPR2A modules have a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPR2A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Two Unbalanced -10 dBV Phono Jack Audio Outputs
L (Left) Output From Pair B; R (Right) From Pair C
Signal and Power Pair Pass-Through on RJ45s

Quick Quote View Details

RDL - Active Two-Pair Receiver-Twisted Pair Format-A-stereo phono jack outputs-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPR2AC MSRP: $375.32

Number of Loaded Sockets: 2
Total Number of Sockets: 2
Color Family: Other

Quick Quote View Details

RDL - Active Three-Pair Receiver-Twisted Pair Format-A-XLR & stereo phono out-Stainless

Model: DS-TPR3A MSRP: $346.23

The D SERIES-TPR3A modules are three-pair audio receiving modules compatible with RDL® Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external ...equipment. The -TPR3A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR3A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR3A features a black front-panel laminate. The DS-TPR3A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPR3A modules feature an XLR audio output and two RCA phono jack outputs, one for the left channel and one for the right channel. The audio signal received from pair A of the RJ45 INPUT jack feeds the XLR audio output jack. The output level from the XLR jack is set to either MIC or LINE level during installation using a rear-panel switch. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the RCA output jacks at the standard -10 dBV consumer level.Although the D SERIES-TPR3A modules access signals from all three cable pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products.The D SERIES-TPR3A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Number of Loaded Sockets: 4
Total Number of Sockets: 4
Mount Type: Wall Mount

Quick Quote View Details

RDL - Active Three-Pair Receiver-Twisted Pair Format-A-XLR & stereo phono out-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPR3AC MSRP: $396.23

Quick Quote View Details

RDL - Three Input Format-A Source Selector-SS

Model: DS-TPRX3A MSRP: $377.93

The D SERIES-TPRX3A is a three-pair audio receiving and switching module compatible with RDL Format-A twisted pair products. Three audio sources are available, corresponding to the three signal pairs A, B and C. The front panel of the -TPRX3A fe...atures three pushbuttons, each corresponding to one of three inputs. When a button is pushed, the corresponding audio input is fed to the output and any previously selected source is shut off. Only one source may be selected at a time. If the button for a selected source is pushed again, all inputs are turned off. An LED adjacent to each button shows which source is selected.When a -TPRX3A is not being used, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity when a button is pushed. In the event of power loss, internal non-volatile memory stores the last source selected. When power is restored, the -TPRX3A will return to the source that was active when power was lost.The D SERIES-TPRX3A was designed for absolute silent switching of audio signals. It provides a balanced line-level output that may be connected unbalanced.The -TPRX3A features bridging inputs, allowing it to be connected to the LOOP OUT jack of other receivers. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receivers for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio monitoring systems using RDL FORMAT-A products.The -TPRX3A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the INPUT RJ45 jack. The -TPRX3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable.The D SERIES-TPRX3A remote controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Use them with RDL wall-mounted accessories as part of a complete audio/video system.

Product Features:

Remote Selection from 3 Sources that Correspond to 3 Format-A Pairs
Single-Button Selection for Each Source
LED Indication

Quick Quote View Details

RDL - Three Input Format-A Source Selector-SS -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPRX3AC MSRP: $427.93

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-XLR mic input w phantom-Stainless

Model: DS-TPS1A MSRP: $309.83

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-XLR mic input w phantom-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPS1AC MSRP: $359.83

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-stereo phono jack inputs-Stainless

Model: DS-TPS2A MSRP: $297.25

The D SERIES-TPS2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The... -TPS2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS2A features a black front-panel laminate. The DS-TPS2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPS2A modules feature two RCA phono jack inputs, one for the left channel source and one for the right channel source. These inputs are designed to receive standard -10 dBV consumer level signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. The buffered left and right inputs are routed to output cable pairs B and C.These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. The D SERIES-TPR1A modules have a second RJ45 jack for an input cable. One single-pair sender may be chained with the -TPS2A. A single-pair sender must be set to feed pair A if it is connected together with the -TPS2A. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPS2A may be powered directly from a 24 Vdc power supply using the detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Two Unbalanced -10 dBV Phono Jack Audio Inputs
Left (L) Input Feeds Pair B; Right (R) Feeds Pair C
Signal and Power Pair Pass-Through on RJ45 Jacks

Quick Quote View Details

Category

Price

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Sitemaps

Downloads