Buy High Performance, Wide Coverage Audio Products

RDL - Decora-Style Active Loudspeaker-White-Installer Level Adjust

Model: D-PSP1F MSRP: $348.25

The D SERIES-PSP1 is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. The input accepts either a -10 dBV unbalanced or a +4 dBu balanced signal on the rear-panel detachable terminal blo...

Quick Quote View Details

RDL - Remote Audio Mixing Control

Model: D-RC2 MSRP: $204.30

The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel. They function exactly as ...

Quick Quote View Details

RDL - Remote Audio Mixing Control -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RC2C MSRP: $214.30

Quick Quote View Details

RDL - Remote Audio Mixing Control with Muting

Model: D-RC2M MSRP: $244.00

The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel. They function exactly as ...

Quick Quote View Details

RDL - Remote Audio Mixing Control with Muting -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RC2MC MSRP: $254.00

Quick Quote View Details

RDL - 2 Channel Remote Control for STICK-ONs

Model: D-RC2ST MSRP: $195.88

The front panel of the D-RC2ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2. An LED adjacent to each button shows w...

Quick Quote View Details

RDL - 2 Channel Remote Control for STICK-ONs -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RC2STC MSRP: $205.88

Compatible Devices: A/V Control Panel
Compatibility: <p>RDL STICK-ONs -Custom Labeled</p>

Quick Quote View Details

RDL - Remote Audio Mixing Control

Model: D-RC3 MSRP: $225.28

The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel. They function exactly as ...

Quick Quote View Details

RDL - Remote Audio Mixing Control -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RC3C MSRP: $235.28

Quick Quote View Details

RDL - Remote Audio Mixing Control with Muting -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RC3MC MSRP: $293.00

Quick Quote View Details

RDL - 4 Channel Remote Control for RU-ASX4D and RU-ASX4DR

Model: D-RC4M MSRP: $212.43

The D SERIES-RC4M is a remote control that provides source selection at single or multiple locations. The -RC4M is designed to directly connect to an RDL® 4-channel switching module controlled by external momentary pushbuttons. The front pan...

Quick Quote View Details

RDL - 4 Channel Remote Control for RU-ASX4D and RU-ASX4DR -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RC4MC MSRP: $222.43

Quick Quote View Details

RDL - 4 Channel Remote Control for RACK-UPs

Model: D-RC4RU MSRP: $195.88

The D-RC4RU is a wall-box mounted remote module designed to directly control an RDL RU-SX4A Audio Switcher Module. The RU-SX4A provides solid state switching of one of four balanced/unbalanced audio inputs to a single balanced/ unbalanced audio ...

Quick Quote View Details

RDL - 4 Channel Remote Control for RACK-UPs -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RC4RUC MSRP: $205.88

Quick Quote View Details

RDL - 4 Channel Remote Control for ST-SX4

Model: D-RC4ST MSRP: $195.50

The D-RC4ST is a wall-box mounted remote module designed to directly control an RDL ST-SX4 Audio Switcher Module. The ST-SX4 provides solid-state switching of one of four unbalanced audio inputs to a single unbalanced audio output. The D-RC4ST c...

Quick Quote View Details

RDL - 4 Channel Remote Control for ST-SX4 -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RC4STC MSRP: $205.50

Quick Quote View Details

RDL - Remote Channel Selector-4 Channels-controls RU-ASX4D/R

Model: D-RCS4 MSRP: $195.69

The D-RCS4 is the ideal choice where sources are to be selected from a single or from multiple remote control locations, and visual indication is desired.The D-RCS4 is designed to directly interface with RDL control modules, such as the RACK-UP&...

Quick Quote View Details

RDL - Remote Channel Selector-4 Channels-controls RU-ASX4D/R -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RCS4C MSRP: $205.69

Quick Quote View Details

RDL - Room Control for RCX-5C Room Combiner-Decora

Model: D-RCX1 MSRP: $381.50

Mounts in individual room to control source and level
Long life pushbuttons
Music or Local / Combined source selection

Quick Quote View Details

RDL - Rotary Level Control-Rotary Encoder-Decora

Model: D-RCX10R MSRP: $412.02

Quick Quote View Details

RDL - Rotary Level Control-Rotary Encoder-Decora -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RCX10RC MSRP: $422.02

Quick Quote View Details

RDL - Room Control for RCX-5C Room Combiner-Decora -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RCX1C MSRP: $391.50

Quick Quote View Details

RDL - Room Control for RCX-5C Room Combiner-Decora

Model: D-RCX2 MSRP: $435.19

Semi-custom design shows room layout
Visual button layout for easy training and operation
Remote control panel for RCX-5C controller

Quick Quote View Details

RDL - Room Control for RCX-5C Room Combiner-Decora -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RCX2C MSRP: $445.19

Quick Quote View Details

RDL - Remote Level Control-Rotary Optical Encoder

Model: D-RLC10 MSRP: $424.38

The D SERIES-RLC10 is a rotary remote level control that provides user adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-term trouble-free and noise...-free operation. These controls directly connect to any RDL VCA and OEM equipment with 0 to 10 Vdc ramp inputs.A single -RLC10 may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the MASTER. The MASTER mode causes this control to drive the 0 to 10 Vdc ramp output and to monitor its pulse terminals in case any other -RLC10 controls are connected.As many as nine additional -RLC10 controls may be wired in parallel with the MASTER control using UTP cable (CAT5, CAT6 or equivalent). The rear-panel MODE switch on each additional remote control is set to SLAVE mode.Operation is the same for a single control, or for each control connected in a multiple control point installation. The 0 to 10 Vdc ramp voltage is incremented up or down when the front-panel knob is rotated. Acceleration is provided so the rate of change is faster when the knob is rotated more rapidly, yielding a responsive feel and rapid elimination of acoustic feedback. The LED ring display encircling the control knob operates as a virtual pointer. When an -RLC10 is not being adjusted, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity during adjustment.In the event of power loss, internal non-volatile memory stores the last level value. When power is restored, the 0 to 10 V output will return to the operating level present when power was lost.Multiple -RLC10 controls set to the SLAVE MODE may be connected to an RDL RU-VCA2A or RU-VCA6A, utilizing the VCA as the ramp generator. This connection is also possible with OEM equipment accepting open-collector pulses that are compatible with the -RLC10 output pulse rate and width.The -RLC10 controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Connections are made through a rear panel detachable terminal block.All the D SERIES-RLC10 features combine to make it the ideal choice for single point or multiple location remote level control in high quality systems. Use them with any RDL VCA module, or side-by-side with other RDL remote accessories as part of a complete audio/video system

Product Features:

Rotary Optical Encoder Remote Level Control
Single or Multiple Control Locations
Up To Ten Remote Control Locations

Quick Quote View Details

RDL - Remote Level Control-Rotary Optical Encoder -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RLC10C MSRP: $434.38

Quick Quote View Details

RDL - Remote Level Controller-0 to 10 k Ohm -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RLC10KC MSRP: $81.41

Quick Quote View Details

RDL - Remote Level Control with Muting

Model: D-RLC10KM MSRP: $195.33

The RLC10KM is the ideal companion to RDL VCA modules where levels are to be controlled from a single remote location and pushbutton muting is desired. It is designed to directly interface with the 3 wire control input of an RDL VCA module. A si...

Quick Quote View Details

RDL - Remote Level Control with Muting -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RLC10KMC MSRP: $205.33

Quick Quote View Details

RDL - Remote Level Control with Muting-Rotary Optical Encoder

Model: D-RLC10M MSRP: $428.79

The D SERIES-RLC10M is a rotary remote level control with pushbutton muting that provides user adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-ter...m trouble-free and noise-free operation. These controls directly connect to any RDL VCA and OEM equipment with 0 to 10 Vdc ramp inputs.A single -RLC10M may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the MASTER. The MASTER mode causes this control to drive the 0 to 10 Vdc ramp output and to monitor its pulse terminals in case any other -RLC10M controls are connected.As many as nine additional -RLC10M controls may be wired in parallel with the MASTER control using UTP cable (CAT5, CAT6 or equivalent). The rear-panel MODE switch on each additional remote control is set to SLAVE mode.Operation is the same for a single control, or for each control connected in a multiple control point installation. The 0 to 10 Vdc ramp voltage is incremented up or down when the front-panel knob is rotated. Acceleration is provided so the rate of change is faster when the knob is rotated more rapidly, yielding a responsive feel and rapid elimination of acoustic feedback. The LED ring display encircling the control knob operates as a virtual pointer. When an -RLC10M is not being adjusted, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity during adjustment.Upon power-up or re-powering after a power loss, the 0 to 10 Vdc ramp will output either a preset level or the last level used. The power-up mode is stored when the control is installed. When programmed for the preset level mode, the user can store a new preset level by holding the MUTE button for more than 3 seconds.Multiple -RLC10M controls set to the SLAVE MODE may be connected to an RDL RU-VCA2A or RU-VCA6A, utilizing the VCA as the ramp generator. This connection is also possible with OEM equipment accepting open-collector pulses that are compatible with the -RLC10M output pulse rate and width.The -RLC10M controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Connections are made through a rear panel detachable terminal block. The MUTE pushbutton is a long-life switch mounted to provide protection from excessive frontal force.All the D SERIES-RLC10M features combine to make it the ideal choice for single point or multiple location remote level control with muting in high quality systems. Use them with any RDL VCA module, or side-by-side with other RDL remote accessories as part of a complete audio/video system.

Product Features:

Rotary Optical Encoder Remote Level Control
Single or Multiple Control Locations
Up To Ten Remote Control Locations

Quick Quote View Details

RDL - Remote Level Control with Muting-Rotary Optical Encoder -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RLC10MC MSRP: $438.79

Quick Quote View Details

RDL - Remote Level Controller-Ramp

Model: D-RLC2 MSRP: $262.57

The D-RLC2 is the ideal choice where levels are to be controlled from a single, or from multiple control locations, and visual level indication is desired.The D-RLC2 is designed to directly interface with RDL control modules, such as the STICK-O...

Quick Quote View Details

RDL - Remote Level Controller-Ramp -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RLC2C MSRP: $272.57

Quick Quote View Details

RDL - Remote Level Controller-Preset Levels

Model: D-RLC3 MSRP: $272.01

The D-RLC3 is designed to directly interface with RDL® control modules which feature a 0 to 10 Vdc control input utilizing an external 10 kΩ resistive control, such as the ST-VCA3, RU-VCA2A and RU-VA6A voltage controlled amplifiers. Th...

Quick Quote View Details

RDL - Remote Level Controller-Preset Levels -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RLC3C MSRP: $282.01

Quick Quote View Details

RDL - Mic/Line Dante Interface White

Model: D-RN2ML MSRP: $949.32

The D-RN2ML is a complete wall-mounted Dante or AES67 audio network interface. It features one XLR mic or line input on the front panel, one stereo Mini-jack line-level input summed to mono on the front panel and two balanced line outputs on a r...ear-panel detachable wiring block. The module is configured and adjusted using RDL CONSOLE or other network control software. The D-RN2ML fits a standard US single-gang electrical box or can be used with the RDL EP-1 adaptor for mounting in EU/UK square back boxes with 60 mm distance screw hole mounting centers. The D-RN2ML is PoE powered and is available in multiple finishes with optional customized graphics.Mic/Line to Network SectionThe XLR input is converted to a Dante network transmit channel. Five gain settings are software-selectable for the XLR input. Three gain settings are provided to match condenser or dynamic microphones. Two gain settings are provided to match standard line levels. P48 phantom voltage may be software enabled when the XLR input is set for mic level.Line Input(s) to Network SectionThe Mini-jack input is converted to one Dante network transmit channel. The left and right Mini-jack inputs are actively summed. Three software-controlled gain settings are provided to increase or decrease the gain by 5 dB from the normal gain setting, optimized for an input level of -10 dBV.Network to Line Outputs SectionTwo Dante audio channels are converted to balanced line level, feeding a rear-panel detachable wiring block. Each output provides balanced +4 dBu for a network digital audio level of -18 dBFS. Each output is equipped with a software-controlled attenuator adjustable in 1 dB steps to a maximum attenuation of 63 dB, then OFF. The outputs may drive local power amplifiers or may feed additional XLR jacks mounted adjacent to the D-RN2ML in a dual-gang box. Two XLR mic or line outputs may be provided using an RDL D-D2 equipped with two AMS-XLRMA jacks, available separately.Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.The D-RN2ML is a professional grade product with an RDL mic preamplifier for studio quality fidelity and low noise performance, with audio coupled through XLR and Mini-jacks housed in a steel chassis with a powder-coated or stainless-steel Decora front plate.The D-RN2ML's superior performance specifications make it ideally suited to installations requiring network control and exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A. for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Single-Gang Dante or AES67 Network Interface for Two Audio Inputs and Two Audio Outputs
One Balanced XLR Mic-Level or Line-Level Input
One Line-Level Summed-to-Mono Mini-jack Input

Quick Quote View Details

RDL - Remote Control Selector-Power On/Off

Model: D-RT2 MSRP: $195.88

The front panel of the D-RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selects ON. An LED adjacent to each button shows which mode...

Quick Quote View Details

RDL - Remote Control Selector-Power On/Off -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-RT2C MSRP: $205.88

Quick Quote View Details

RDL - Room Control Station for SourceFlex Distributed Audio System

Model: D-SFRC8 MSRP: $430.90

The D SERIES-SFRC8 Room Control Station is a SourceFlex listening station for wall mounting in a room, providing source selection and volume control from up to 8 audio sources. A numeric display shows the selected source. There are two line-leve...

Quick Quote View Details

RDL - Room Control Station for SourceFlex Distributed Audio System -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-SFRC8C MSRP: $440.90

Quick Quote View Details

RDL - Audio Selector for SourceFlex Distributed Audio System

Model: D-SFRC8L MSRP: $316.77

The D SERIES-SFRC8L Audio Selector is a SourceFlex module for wall mounting in a room, providing source selection from up to 8 audio sources. A numeric display shows the selected source. There are two line-level audio outputs on the rear of the ...

Quick Quote View Details

RDL - Audio Selector for SourceFlex Distributed Audio System -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-SFRC8LC MSRP: $326.77

Quick Quote View Details

RDL - Stereo Headphone Amplifier-Decora panel with user level control

Model: D-SH1 MSRP: $283.35

The D/DS SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. The D/DS-SH1 is ideally suited to applications as diverse as language translation, museums, interview studios an...

Quick Quote View Details

RDL - Stereo Headphone Amplifier-Decora panel with user level control -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-SH1C MSRP: $293.35

Quick Quote View Details

RDL - Stereo Headphone Amplifier-Decora panel with user level control

Model: D-SH1M MSRP: $276.43

The D/DS-SH1M is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. It is ideally suited to applications as diverse as language translation, museums, interview studios and music s...

Quick Quote View Details

RDL - Stereo Headphone Amplifier-Decora panel with user level control -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-SH1MC MSRP: $286.43

Application/Usage: Headphone

Quick Quote View Details

RDL - 3.5 Watt Decora Audio Power Amplifier (Compatible with Guest Room Audio System)

Model: D-TPA1A MSRP: $306.75

The -TPA1A modules are two pair audio amplifier modules compatible with RDL Format A twisted pair products. Each -TPA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack. The left and right audio signals received on pairs B a...

Quick Quote View Details

RDL - 3.5 Watt Decora Audio Power Amplifier (Compatible with Guest Room Audio System) -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPA1AC MSRP: $316.75

Quick Quote View Details

RDL - Active Single-Pair Receiver-Twisted Pair Format-A-XLR mic/line output

Model: D-TPR1A MSRP: $312.46

The D SERIES-TPR1A modules are single-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equi...pment. The -TPR1A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR1A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR1A features a black front-panel laminate. The DS-TPR1A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. APPLICATION: The D SERIES-TPR1A modules feature an XLR output jack. A rear-panel switch set during installation determines which of the three FORMAT-A pairs is buffered to feed the module output. The audio signal received from the selected pair of the RJ45 INPUT jack feeds the XLR audio output jack. The output level from the XLR jack is set to either MIC or LINE level during installation using a rear-panel switch. This module receives signal from only one cable pair, so the D SERIES-TPR1A modules have a second RJ45 jack to connect cables to additional receiver modules. Two other single-pair receivers may be chained to the second RJ45 jack, or a single two-pair receiver may be connected. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks. The D SERIES-TPR1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Mic or Line Level XLR Output
Switch-Selectable Output Level on Rear Panel
Switch Selects which Pair (A, B or C) Feeds the Output

Quick Quote View Details

RDL - Active Single-Pair Receiver-Twisted Pair Format-A-XLR mic/line output -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPR1AC MSRP: $322.46

Quick Quote View Details

RDL - Active Two-Pair Receiver-Twisted Pair Format-A-stereo phono jack outputs

Model: D-TPR2A MSRP: $325.64

The D SERIES-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipme...nt. The -TPR2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR2A features a black front-panel laminate. The DS-TPR2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. APPLICATION: The D SERIES-TPR2A modules feature two RCA phono jack outputs, one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level. This module receives signal from only two cable pairs, so the D SERIES-TPR2A modules have a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks. The D SERIES-TPR2A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Two Unbalanced -10 dBV Phono Jack Audio Outputs
L (Left) Output From Pair B; R (Right) From Pair C
Signal and Power Pair Pass-Through on RJ45s

Quick Quote View Details

RDL - Active Two-Pair Receiver-Twisted Pair Format-A-stereo phono jack outputs -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPR2AC MSRP: $335.64

Number of Loaded Sockets: 2
Total Number of Sockets: 2

Quick Quote View Details

RDL - Active Three-Pair Receiver-Twisted Pair Format-A-XLR and stereo phono outputs

Model: D-TPR3A MSRP: $346.57

The D SERIES-TPR3A modules are three-pair audio receiving modules compatible with RDL® Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external ...equipment. The -TPR3A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR3A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR3A features a black front-panel laminate. The DS-TPR3A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. APPLICATION: The D SERIES-TPR3A modules feature an XLR audio output and two RCA phono jack outputs, one for the left channel and one for the right channel. The audio signal received from pair A of the RJ45 INPUT jack feeds the XLR audio output jack. The output level from the XLR jack is set to either MIC or LINE level during installation using a rear-panel switch. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the RCA output jacks at the standard -10 dBV consumer level. Although the D SERIES-TPR3A modules access signals from all three cable pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The D SERIES-TPR3A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Mic or Line Level XLR Output
Switch-Selectable Output Level on Rear Panel
Two Unbalanced -10 dBV Phono Jack Audio Outputs

Quick Quote View Details

RDL - Active Three-Pair Receiver-Twisted Pair Format-A-XLR and stereo phono outputs -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPR3AC MSRP: $356.57

Quick Quote View Details

RDL - Three Input Format-A Source Selector

Model: D-TPRX3A MSRP: $377.93

The D SERIES-TPRX3A is a three-pair audio receiving and switching module compatible with RDL Format-A twisted pair products. Three audio sources are available, corresponding to the three signal pairs A, B and C. The front panel of the -TPRX3A fe...

Quick Quote View Details

RDL - Three Input Format-A Source Selector -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPRX3AC MSRP: $387.93

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-XLR mic input w phantom

Model: D-TPS1A MSRP: $311.05

The D SERIES-TPS1A modules are single-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. ...The -TPS1A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS1A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS1A features a black front-panel laminate. The DS-TPS1A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. APPLICATION: The D SERIES-TPS1A modules feature an XLR microphone input. The module provides IEC 24 V phantom and accepts input signals from both dynamic and condenser microphones. The input signal is amplified using a studio-quality microphone preamplifier optimized for normal operating levels. The rear-panel GAIN switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to one output cable pair selected during installation using a rear-panel switch. These modules drive only one cable pair, therefore they accept signals and power from other mic-level or line-level Format-A senders. The D SERIES-TPS1A modules have a second RJ45 jack for these input cables. Two other single-pair senders may be chained with the -TPS1A, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The -TPS1A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks. The D SERIES-TPS1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Microphone XLR Input with Phantom
Switch-Selectable Mic Gain on Rear Panel
Switch Selects which RJ45 Pair (A, B or C) is Fed

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-XLR mic input w phantom -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPS1AC MSRP: $321.05

Application/Usage: Microphone

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-stereo phono jack inputs -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPS2AC MSRP: $306.95

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR microphone & stereo Mini-jack in

Model: D-TPS2AM MSRP: $296.95

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR microphone & stereo Mini-jack in -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPS2AMC MSRP: $306.95

Quick Quote View Details

RDL - Active Three-Pair Sender-Twisted Pair Format-A-XLR mic & stereo phono in

Model: D-TPS3A MSRP: $314.67

The D SERIES-TPS3A modules are three-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. T...he -TPS3A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS3A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS3A features a black front-panel laminate. The DS-TPS3A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. APPLICATION: The D SERIES-TPS3A modules features an XLR microphone input and two RCA phono jack inputs, one for the left channel source and one for the right channel source. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The buffered left and right line-level inputs are routed to output cable pairs B and C. These modules drive all three FORMAT-A cable pairs, so they are not equipped to receive inputs from other sender modules. The D SERIES-TPS3A may not be connected together with any other sending modules. The D SERIES-TPS3A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Microphone XLR Input with Phantom
Switch-Selectable Mic Gain on Rear Panel
Two Unbalanced -10 dBV Phono Jack Line Inputs

Quick Quote View Details

RDL - Active Three-Pair Sender-Twisted Pair Format-A-XLR mic & stereo phono in -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPS3AC MSRP: $324.67

Application/Usage: Microphone

Quick Quote View Details

RDL - Passive Single-Pair Sender-Twisted Pair Format-A-stereo phono jack inputs

Model: D-TPS6A MSRP: $141.48

The -TPS6A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features two gold plated phono jacks intended for stereo consumer line level audio sources. A studio-quality transformer pr...

Quick Quote View Details

RDL - Passive Single-Pair Sender-Twisted Pair Format-A-stereo phono jack inputs -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPS6AC MSRP: $151.48

Quick Quote View Details

RDL - Passive Single-Pair Sender-Twisted Pair Format-A-Mini-Jack Input -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPS7AC MSRP: $151.48

Quick Quote View Details

RDL - Format-A Multiple Location Audio Sender (Compatible with Guest Room Audio System)

Model: D-TPS8A MSRP: $269.17

The D SERIES-TPS8A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The... D- and DS- models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS8A features a white front-panel laminate with gray lettering that matches RDL Decora®-style remote controls. The DS-TPS8A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. The DB-TPS8A features a black front-panel laminate. The -TPS8A modules feature one stereo Mini jack input on the front panel. The input is designed to receive standard -10 dBV consumer level signals from sources such as a computer or personal media player. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. The buffered left and right inputs are routed to output cable pairs B and C. These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. One single-pair sender may be chained with the -TPS8A. A single-pair sender must be set to feed pair A if it is connected together with the -TPS8A. The -TPS8A modules have a Format-A input on the rear panel. This RJ45 input receives left and right signals from preceding senders and sums them together with the local Mini jack input. This allows multiple -TPS8A modules to be connected in series with all the Mini jack inputs remaining active. The -TPS8A is remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. There are no illuminated indicators that could be distracting in dark locations, such as a hotel room. RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Unbalanced -10 dBV Mini Jack Audio Input
Rear-panel RJ45 Input for Connecting Additional TPS8A Senders
Left (L) Input Feeds Pair B; Right (R) Feeds Pair C

Quick Quote View Details

RDL - Format-A Multiple Location Audio Sender o System) -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPS8AC MSRP: $279.17

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-Mini-Jack & Stereo RCA In -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPSL1AC MSRP: $320.06

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR Microphone & Stereo RCA In

Model: D-TPSL2A MSRP: $314.69

The -TPSL2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TPSL2...A modules feature an XLR microphone input and two RCA phono jack inputs summed to mono. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The summed left and right line-level inputs are routed to output cable pair B. These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. One single-pair sender may be chained with the -TPSL2A. A single-pair sender must be set to feed pair C if it is connected together with the -TPSL2A. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks. The -TPSL2A may be powered directly from a 24 Vdc power supply using the detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPSL2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Microphone XLR Input with Phantom
Switch-Selectable Mic Gain on Rear Panel
Two Unbalanced -10 dBV Phono Jack Line Inputs

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR Microphone & Stereo RCA In -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPSL2AC MSRP: $324.69

Quick Quote View Details

RDL - Active Two-Pair Sender Dual Microphone Preamplifier-Format-A-White

Model: D-TPSM2A MSRP: $457.26

The D SERIES-TPSM2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. Th...e -TPSM2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPSM2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPSM2A features a black front-panel laminate. The DS-TPSM2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. APPLICATION: The D SERIES-TPSM2A modules feature two XLR microphone inputs. The module provides IEC 48 V phantom (P48) and accepts input signals from both dynamic and condenser microphones. The input signals are amplified using studio-quality microphone preamplifiers optimized for normal operating levels. The rear-panel GAIN switch is normally set by the installer for AUTO (automatic) gain. The module automatically sets the gain to 60 dB for dynamic microphones or 40 dB for condenser microphones. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. If the module is used only with condenser microphones, the switch may be set to LOW gain. Each pre-amplified microphone source is routed to one output cable pair selected during installation using a rear-panel switch. These modules drive only two cable pairs, therefore they accept a signal and power from another mic-level or line-level Format-A sender. The D SERIES-TPSM2A modules have a second RJ45 jack for that input cable. One single-pair sender may be chained with the -TPSM2A. If two senders are connected together, each audio source must feed a different pair: A, B or C. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks. The D SERIES-TPSM2A must be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Two Balanced Microphone XLR Inputs with P48 Phantom
Switch-Selectable Mic Gain on Rear Panel
Gain Selector Provides Fixed 40 dB, 60 dB or Automatic

Quick Quote View Details

RDL - Active Two-Pair Sender Dual Microphone Preamplifier-Format-A-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-TPSM2AC MSRP: $467.26

Application/Usage: Microphone

Quick Quote View Details

RDL - D-TPSML1A Active Single-Pair Sender - UTP Format-A - XLR mic/line input

Model: D-TPSML1A MSRP: $311.06

The D SERIES-TPSML1A modules feature an XLR microphone or line input. The module provides IEC P24 phantom and accepts input signals from balanced line-level sources or from both dynamic and condenser microphones. The input signal is buffered or ...

Quick Quote View Details

RDL - XLR 3-pin Female & 3-pin Male on D Plate-Terminal block connections -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-XLR2C MSRP: $45.83

Quick Quote View Details

RDL - Dual XLR 3-pin Female Jacks on D Plate-Terminal block connections -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-XLR2FC MSRP: $45.83

Quick Quote View Details

RDL - Dual XLR 3-pin Male Jacks on D Plate-Terminal block connections -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-XLR2MC MSRP: $43.89

Quick Quote View Details

RDL - XLR 3-pin Female Jack on D Plate-Terminal block connections

Model: D-XLR3F MSRP: $30.16

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Female Jack on D Plate-Terminal block connections -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-XLR3FC MSRP: $40.16

Quick Quote View Details

RDL - XLR 3-pin Male Jack on D Plate-Terminal block connections

Model: D-XLR3M MSRP: $30.16

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Male Jack on D Plate-Terminal block connections -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: D-XLR3MC MSRP: $40.16

Product Material: Steel
Weight (Approximate): 1.44 oz
Application/Usage: Connector

Quick Quote View Details

Atlas - 8" Speaker Package with 25V/70.7V-4W Transformer and 161-8 Baffle

Model: D161-8 MSRP: $121.99

Convenient, labor saving assemblies are ideal for use wherever a general-purpose paging and music speaker is required. Quality components are factory wired and shipped complete with dual-cone speaker, dual-voltage transformer and round or square...

Quick Quote View Details

Audix - MIC, DYN INST, CLIP & POUCH

Model: D2 AUDIX MSRP: $199.00

The D2 dynamic instrument microphone is used for stage, studio, and broadcast applications. It is designed with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM diaphragm for natural, accurate sound re...

Quick Quote View Details

Audix - 3 PK D2, DYNAMIC MIC 3 DVICEBP, 3 POUCH

Model: D2TRIO MSRP: $467.00

The Audix D2 Trio is everything you need for miking your toms, all in one convenient package. The tailored frequency response of the D2 drum microphone gives you all the punch, clarity, and warmth needed for percussion without being muddy or boo...

Quick Quote View Details

Audix - MIC, DYN INST, CLIP & POUCH

Model: D4 AUDIX MSRP: $199.00

With a wide frequency response of 40 Hz – 18 kHz and the ability to handle SPLs in excess of 144 dB, the D4 dynamic instrument microphone is an excellent choice for miking instruments requiring precise, low-frequency reproduction such as large r...

Quick Quote View Details

ADJ - D4 Branch RM;4 output DMX data splitter

Model: D4B100 MSRP: $1199.95

The ADJ D4 Branch RM is a single rack space, 4-way distributor/booster with 3-pin and 5-pin XLR input and output jacks. This unit takes the incoming DMX signal and splits it to four (4) separate outputs that are electronically isolated from each...

Quick Quote View Details

Audix - Hyper-Cardioid Dynamic Drum and Instrument microphone

Model: D6 MSRP: $239.00

The D6 is used for stage, studio and broadcast applications. Designed with a cardioid pickup pattern for isolation and feedback control, the D6 is equipped with a VLM#8482; diaphragm for natural, accurate sound reproduction. Lightweight, compact...

Quick Quote View Details

Audix - MIC, DYN, SUB IMPULSE, INST, BLK

Model: D6 AUDIX MSRP: $269.00

Designed, machined, assembled and tested by Audix in the USA, the D6 is a dynamic instrument microphone used for stage, studio and broadcast applications. The D6 is characterized with a cardioid pickup pattern for isolation and feedback control ...

Quick Quote View Details

Toa - Digital Power Amplifier- 4x 500 W @ 70V 2x 1000 W Bridged @ 140V

Model: DA-500F-HLCU MSRP: $4001.00

Quick Quote View Details

Toa - Digital Power Amplifier 4x500w @ 70v

Model: DA-550F CU MSRP: $3721.00

The DA-550F is a 4-Channel Digital Power Amplifier featuring lightweight, compact, high power output, and high efficiency. It delivers 550 W Ã— 4 channels (4 Î© output) using a switching power supply. Each channel is equipped with an independent...

Quick Quote View Details

TASCAM - 64 Track Audio Recorder With Dual Power (2 Inlets)

Model: DA-6400DP MSRP: $4999.00

Compact 64-channel digital multitrack recorder/player for Live and Broadcast applictions TASCAM's DA-6400 is an all-new 64-track recorder that records to an internal SSD drive caddy for live and event recording. Professional I/O options like MAD...

Quick Quote View Details

Atlas - PoE+ Dante Outdoor Weather Resistant Horn Speaker

Model: DA-APX MSRP: $1334.99

AtlasIED DA-APX is a weather resistant IP PoE amplified constant directivity high-output horn featuring Audinate’s Dante digital audio transport platform. The DA-APX features a 60 x 40-degree constant-dispersion pattern across the controlled fre...

Quick Quote View Details

Atlas - 8" Pendent Mount PoE Dante Speaker System - Black

Model: DA-PM8GD-B MSRP: $1258.99

The AtlasIED DA-PM8GD is an 8" indoor pendent mount IP PoE amplified loudspeaker featuring Audinate’s Dante digital audio transport platform. The DA-PM8GD supports a 8" efficient speaker design with a sensitivity of 98dB 1W/1m and a maximum outp...

Quick Quote View Details

Yamaha - Direct Attach Cable for cascading switches (1m)

Model: DAC-SWRT-1M MSRP: $219.00

Yamaha Direct Attached Cable for 10Gbps audio network.

Twinax cable 30AWG, Passive
Cable length: 1m

Quick Quote View Details

Yamaha - Direct Attach Cable for cascading switches (3m)

Model: DAC-SWRT-3M MSRP: $279.00

Yamaha Direct Attached Cable for 10Gbps audio network.

Twinax cable 30AWG, Passive
Cable length: 9.8' / 3m

Quick Quote View Details

ASHLY - Ashly 32-Channel Dante Network Audio Interface Module

Model: DANTE-32 MSRP: $839.00

The Ashly 32-Channel Dante Network Audio Interface Module is specially designed for digiMIX-Series Digital Mixers.

Application/Usage: Mixer
Compatibility: <p>DIGIMIX24 24-Channel Digital Mixer</p>

Quick Quote View Details

Yamaha - YAMAHA Audinate, 16-Ch Dante Network I/O Card

Model: DANTE-MY16-AUD2 MSRP: $749.00

Quick Quote View Details

Atlas - 70.7v, 35 watts, decora, white, ivory

Model: DAT35ST70 MSRP: $133.99

Atlas Sound offers traditional autoformer controls to provide excellent stereo performance and maximum speaker-handling capability. The DAT35ST70 includes positive off and full-power pass through at the maximum setting. Contacts are make-before-...

Quick Quote View Details

RDL - 1/4 in. Phone Jack on D Plate-Terminal block connections-Black

Model: DB-1/4F MSRP: $20.79

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Detachable Terminal Block

Quick Quote View Details

RDL - 1/4 in. Phone Jack on D Plate-Terminal block connections-Black

Model: DB-1/4FC MSRP: $30.79

Quick Quote View Details

Category

Brand

Digital Inverter Compressor

Type

Frequency Range

Bridge Element

Price

Receiver Type

Microphone Type

Polar Pattern

Number of Battery & Surge Outlets

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Sitemaps

Downloads