Buy High Performance, Wide Coverage Audio Products

RDL - Active Single-Pair Receiver-Twisted Pair Format-A-XLR mic/line output-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPR1AC MSRP: $322.46

Quick Quote View Details

RDL - Active Two-Pair Receiver-Twisted Pair Format-A-stereo phono jack outputs-Black

Model: DB-TPR2A MSRP: $325.64

The D SERIES-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipme...nt. The -TPR2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR2A features a black front-panel laminate. The DS-TPR2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPR2A modules feature two RCA phono jack outputs, one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level.This module receives signal from only two cable pairs, so the D SERIES-TPR2A modules have a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPR2A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Two Unbalanced -10 dBV Phono Jack Audio Outputs
L (Left) Output From Pair B; R (Right) From Pair C
Signal and Power Pair Pass-Through on RJ45s

Quick Quote View Details

RDL - Active Two-Pair Receiver-Twisted Pair Format-A-stereo phono jack outputs-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPR2AC MSRP: $335.64

Quick Quote View Details

RDL - Active Three-Pair Receiver-Twisted Pair Format-A-XLR and stereo phono outputs-Black

Model: DB-TPR3A MSRP: $346.57

The D SERIES-TPR3A modules are three-pair audio receiving modules compatible with RDL® Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external ...equipment. The -TPR3A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR3A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPR3A features a black front-panel laminate. The DS-TPR3A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPR3A modules feature an XLR audio output and two RCA phono jack outputs, one for the left channel and one for the right channel. The audio signal received from pair A of the RJ45 INPUT jack feeds the XLR audio output jack. The output level from the XLR jack is set to either MIC or LINE level during installation using a rear-panel switch. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the RCA output jacks at the standard -10 dBV consumer level.Although the D SERIES-TPR3A modules access signals from all three cable pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products.The D SERIES-TPR3A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Mic or Line Level XLR Output
Switch-Selectable Output Level on Rear Panel
Two Unbalanced -10 dBV Phono Jack Audio Outputs

Quick Quote View Details

RDL - Active Three-Pair Receiver-Twisted Pair Format-A-XLR and stereo phono outputs-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPR3AC MSRP: $356.57

Quick Quote View Details

RDL - Three Input Format-A Source Selector-Black

Model: DB-TPRX3A MSRP: $377.93

The D SERIES-TPRX3A is a three-pair audio receiving and switching module compatible with RDL Format-A twisted pair products. Three audio sources are available, corresponding to the three signal pairs A, B and C. The front panel of the -TPRX3A fe...

Quick Quote View Details

RDL - Three Input Format-A Source Selector-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPRX3AC MSRP: $387.93

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-XLR mic input w phantom-Black

Model: DB-TPS1A MSRP: $311.05

The D SERIES-TPS1A modules are single-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. ...The -TPS1A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS1A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS1A features a black front-panel laminate. The DS-TPS1A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPS1A modules feature an XLR microphone input. The module provides IEC 24 V phantom and accepts input signals from both dynamic and condenser microphones. The input signal is amplified using a studio-quality microphone preamplifier optimized for normal operating levels. The rear-panel GAIN switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to one output cable pair selected during installation using a rear-panel switch.These modules drive only one cable pair, therefore they accept signals and power from other mic-level or line-level Format-A senders. The D SERIES-TPS1A modules have a second RJ45 jack for these input cables. Two other single-pair senders may be chained with the -TPS1A, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The -TPS1A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPS1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Microphone XLR Input with Phantom
Switch-Selectable Mic Gain on Rear Panel
Switch Selects which RJ45 Pair (A, B or C) is Fed

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-XLR mic input w phantom-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPS1AC MSRP: $321.05

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-stereo phono jack inputs-Black

Model: DB-TPS2A MSRP: $296.95

The D SERIES-TPS2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The... -TPS2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS2A features a black front-panel laminate. The DS-TPS2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPS2A modules feature two RCA phono jack inputs, one for the left channel source and one for the right channel source. These inputs are designed to receive standard -10 dBV consumer level signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. The buffered left and right inputs are routed to output cable pairs B and C.These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. The D SERIES-TPR1A modules have a second RJ45 jack for an input cable. One single-pair sender may be chained with the -TPS2A. A single-pair sender must be set to feed pair A if it is connected together with the -TPS2A. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPS2A may be powered directly from a 24 Vdc power supply using the detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Two Unbalanced -10 dBV Phono Jack Audio Inputs
Left (L) Input Feeds Pair B; Right (R) Feeds Pair C
Signal and Power Pair Pass-Through on RJ45 Jacks

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-stereo phono jack inputs-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPS2AC MSRP: $306.95

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR microphone & stereo Mini-jack in-Black

Model: DB-TPS2AM MSRP: $296.95

The D SERIES-TPS2AM modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. Th...e -TPS2AM models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS2AM features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS2AM features a black front-panel laminate. The DS-TPS2AM is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPS2AM modules features an XLR microphone input and a stereo Mini-jack input summed to mono. The unbalanced Mini-jack inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The buffered Mini-jack input is routed to output cable pair B.These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. The -TPS2AM modules have a second RJ45 jack for an input cable. One single-pair sender may be chained with the -TPS2AM. A single-pair sender must be set to feed pair C if it is connected together with the -TPS2AM. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPS2AM may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS2AM may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. The -TPS2AM modules have a second RJ45 jack for an input cable. One single-pair sender may be chained with the -TPS2AM. A single-pair sender must be set to feed pair C if it is connected together with the -TPS2AM. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.

Product Features:

Mini-Jack -10 dBV Stereo Line Input Summed to Mono
MIC Feeds Pair A; Mini-jack Feeds Pair B
Remote Powering through Twisted Pair Cable

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR microphone & stereo Mini-jack in-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPS2AMC MSRP: $306.95

Quick Quote View Details

RDL - Active Three-Pair Sender-Twisted Pair Format-A-XLR mic & stereo phono in-Black

Model: DB-TPS3A MSRP: $314.67

The D SERIES-TPS3A modules are three-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. T...he -TPS3A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS3A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS3A features a black front-panel laminate. The DS-TPS3A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPS3A modules features an XLR microphone input and two RCA phono jack inputs, one for the left channel source and one for the right channel source. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The buffered left and right line-level inputs are routed to output cable pairs B and C.These modules drive all three FORMAT-A cable pairs, so they are not equipped to receive inputs from other sender modules. The D SERIES-TPS3A may not be connected together with any other sending modules.The D SERIES-TPS3A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Balanced Microphone XLR Input with Phantom
Switch-Selectable Mic Gain on Rear Panel
Two Unbalanced -10 dBV Phono Jack Line Inputs

Quick Quote View Details

RDL - Active Three-Pair Sender-Twisted Pair Format-A-XLR mic & stereo phono in-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPS3AC MSRP: $324.67

Quick Quote View Details

RDL - Format-A Multiple Location Audio Sender-Black (Compatible with Guest Room Audio System)

Model: DB-TPS8A MSRP: $269.17

The D SERIES-TPS8A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The... D- and DS- models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS8A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DS-TPS8A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. The DB-TPS8A features a black front-panel laminate. The -TPS8A modules feature one stereo Mini jack input on the front panel. The input is designed to receive standard -10 dBV consumer level signals from sources such as a computer or personal media player. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. The buffered left and right inputs are routed to output cable pairs B and C. These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. One single-pair sender may be chained with the -TPS8A. A single-pair sender must be set to feed pair A if it is connected together with the -TPS8A. The -TPS8A modules have a Format-A input on the rear panel. This RJ45 input receives left and right signals from preceding senders and sums them together with the local Mini jack input. This allows multiple -TPS8A modules to be connected in series with all the Mini jack inputs remaining active. The -TPS8A is remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. There are no illuminated indicators that could be distracting in dark locations, such as a hotel room. RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Unbalanced -10 dBV Mini Jack Audio Input
Rear-panel RJ45 Input for Connecting Additional -TPS8A Senders
Left (L) Input Feeds Pair B; Right (R) Feeds Pair C

Quick Quote View Details

RDL - Format-A Multiple Location Audio Sender-Black (Compatible with Guest Room Audio System) -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPS8AC MSRP: $279.17

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-Mini-Jack & Stereo RCA In-Black

Model: DB-TPSL1A MSRP: $310.06

The -TPSL1A modules are single pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources.The -TPS...

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-Mini-Jack & Stereo RCA In-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPSL1AC MSRP: $320.06

Number of RCA Ports: 2

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR Microphone & Stereo RCA In-Black

Model: DB-TPSL2A MSRP: $314.69

The -TPSL2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources.The -TPSL2A...

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR Microphone & Stereo RCA In-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPSL2AC MSRP: $324.69

Number of RCA Ports: 2
Color Family: Black
Product Color: Black

Quick Quote View Details

RDL - Active Two-Pair Sender Dual Microphone Preamplifier-Format-A-Black

Model: DB-TPSM2A MSRP: $457.26

The D SERIES-TPSM2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. Th...e- TPSM2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPSM2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. TheDB-TPSM2A features a black front-panel laminate. The DS-TPSM2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.APPLICATION: The D SERIES-TPSM2A modules feature two XLR microphone inputs. The module provides IEC 48 V phantom (P48) and accepts input signals from both dynamic and condenser microphones. The input signals are amplified using studio-quality microphone preamplifiers optimized for normal operating levels. The rear-panel GAIN switch is normally set by the installer for AUTO (automatic) gain. The module automatically sets the gain to 60 dB for dynamic microphones or 40 dB for condenser microphones. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. If the module is used only with condenser microphones, the switch may be set to LOW gain. Each pre-amplified microphone source is routed to one output cable pair selected during installation using a rear-panel switch.These modules drive only two cable pairs; therefore, they accept a signal and power from another mic-level or line-level Format-A sender. The D SERIES-TPSM2Amodules have a second RJ45 jack for that input cable. One single-pair sender may be chained with the- TPSM2A. If two senders are connected together, each audio source must feed a different pair: A, B or C. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPSM2A must be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable.RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Product Features:

Two Balanced Microphone XLR Inputs with P48 Phantom
Switch-Selectable Mic Gain on Rear Panel
Gain Selector Provides Fixed 40 dB, 60 dB or Automatic

Quick Quote View Details

RDL - Active Two-Pair Sender Dual Microphone Preamplifier-Format-A-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-TPSM2AC MSRP: $467.26

Quick Quote View Details

RDL - XLR 3-pin Female & 3-pin Male on D Plate-Terminal block connections-Black

Model: DB-XLR2 MSRP: $35.83

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Female & 3-pin Male on D Plate-Terminal block connections-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-XLR2C MSRP: $45.83

Product Material: Steel
Weight (Approximate): 2.08 oz

Quick Quote View Details

RDL - Dual XLR 3-pin Female Jacks on D Plate-Terminal block connections-Black

Model: DB-XLR2F MSRP: $35.83

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - Dual XLR 3-pin Female Jacks on D Plate-Terminal block connections-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-XLR2FC MSRP: $45.83

Quick Quote View Details

RDL - Dual XLR 3-pin Male Jacks on D Plate-Terminal block connections-Black

Model: DB-XLR2M MSRP: $33.89

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - Dual XLR 3-pin Male Jacks on D Plate-Terminal block connections-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-XLR2MC MSRP: $43.89

Quick Quote View Details

RDL - XLR 3-pin Female Jack on D Plate-Terminal block connections-Black

Model: DB-XLR3F MSRP: $30.16

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Female Jack on D Plate-Terminal block connections-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-XLR3FC MSRP: $40.16

Quick Quote View Details

RDL - XLR 3-pin Male Jack on D Plate-Terminal block connections-Black

Model: DB-XLR3M MSRP: $30.16

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Male Jack on D Plate-Terminal block connections-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-XLR3MC MSRP: $40.16

Quick Quote View Details

Shure - 8 Channel DB25 to XLR Male Audio Snake; 25 ft.

Model: DB25-XLRM MSRP: $194.00

Eight-channel DB25 to XLR male audio snake for use with SCM820-DB25 models.

Quick Quote View Details

dbx - Mic Preamp / Channel Strip DBX286SV

Model: DBX-286SVVM MSRP: $425.00

The dbx® 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a ...noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy® compressor to transparently smooth out uneven acoustic tracks or deliver that classic ""in your face"" vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps. The dbx 286s offers a full compliment of metering and status LEDs to visually guide you to achieving the right sound. The floating balanced XLR Mic Input accepts balanced or unbalanced inputs to easily connect to professional and home studio microphones. The additional 1/4"" TRS Line Input can accept balanced/unbalanced signals to process live electronic instruments or pre-recorded tracks at mixdown. Use the Insert jack to interface between the Mic Preamp and the signal processing sections to ""loop out"" to external processors (such as EQ or delay unit) or to mix the Mic Preamp's signal out to an external destination. The cost and hassle of patching together multiple processors for use on one track can be frustrating. The dbx 286s provides you with all the mic processing you need in one box, with the shortest, cleanest signal path to keep your music sounding its best!

Product Features:

Studio quality Mic Preamp/Channel Strip Processor
Classic dbx Compression puts great sound within easy reach
Frequency tunable De-Esser reduces sibilance and high frequency distortion

Quick Quote View Details

dbx - DBX 234xs - Crossover (XLR)

Model: DBX234XSV MSRP: $470.00

The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's fi...

Quick Quote View Details

dbx - Compressor/Limiter

Model: DBX560A MSRP: $450.00

The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to our 900 Series and the 560A continues that tradition. Fe...

Quick Quote View Details

dbx - 6x4 Digital Zone Processor

Model: DBX640V MSRP: $1000.00

With 6 inputs and 4 outputs the dbx ZonePRO® 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility,... the 640/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO® every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO® products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters.The ZonePRO® 640 will take your Commercial Audio system to the next level with advanced processing, versatility and control.

Product Features:

Advanced Feedback Suppression (AFS™)
Autowarmth®
Auto Gain Control

Quick Quote View Details

dbx - 6x4 Digital Zone Processor 641

Model: DBX641V MSRP: $830.00

With 6 inputs and 4 outputs the dbx ZonePRO® 641 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications. Designed to offer superior system sonic performance and flexibility..., the 641/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 641 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO® every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO® products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters. The ZonePRO® 641 will take your Commercial Audio system to the next level with advanced processing, versatility and control. Features Advanced Feedback Suppression (AFS™) Autowarmth® Auto Gain Control Compression Limiting Noise Gating Notch Filtering Bandpass and Crossover Filters Parametric EQ Security Lockout Wall Panel Control RS-232 Control Windows® 2000 and XP GUI IEC, UL and CSA Approvals

Product Features:

Height: 1.8"
Width: 19"
Depth: 5.8"

Quick Quote View Details

dbx - Program Selector Zone Controller ZC-4

Model: DBXZC4V MSRP: $120.00

The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene se...

Quick Quote View Details

RDL - Single Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-black

Model: DC-1B MSRP: $100.63

The DC-1B desktop chassis holds one Decora®-style product, which includes RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertic...

Quick Quote View Details

RDL - Single Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-gray

Model: DC-1G MSRP: $100.63

Quick Quote View Details

RDL - Single Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-white

Model: DC-1W MSRP: $100.63

The DC-1W desktop chassis holds one Decora®-style product, which includes RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertic...

Quick Quote View Details

RDL - Double Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-black

Model: DC-2B MSRP: $126.48

The DC-2B desktop chassis holds one or two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ver...

Quick Quote View Details

RDL - Double Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-gray

Model: DC-2G MSRP: $126.48

Quick Quote View Details

RDL - Double Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-white

Model: DC-2W MSRP: $126.48

The DC-2W desktop chassis holds one or two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ver...

Quick Quote View Details

RDL - Triple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-black

Model: DC-3B MSRP: $151.77

The DC-3B desktop chassis holds one, two or three Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or o...

Quick Quote View Details

RDL - Triple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-gray

Model: DC-3G MSRP: $151.77

The DC-3G desktop chassis holds one, two or three Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or o...

Quick Quote View Details

RDL - Triple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-white

Model: DC-3W MSRP: $151.77

Quick Quote View Details

RDL - Quadruple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-black

Model: DC-4B MSRP: $177.47

The DC-4B desktop chassis holds one, two, three or four Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tableto...

Quick Quote View Details

RDL - Quadruple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-gray

Model: DC-4G MSRP: $177.47

Quick Quote View Details

RDL - Quadruple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-white

Model: DC-4W MSRP: $177.47

The DC-4W desktop chassis holds one, two, three or four Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tableto...

Quick Quote View Details

Dynacord - Carrying bag for CMS 600-3

Model: DC-BAG-600CMS MSRP: $197.00

Quick Quote View Details

Dynacord - Carrying bag for PowerMate 600-3

Model: DC-BAG-600PM MSRP: $205.00

Quick Quote View Details

Dynacord - 6 Mic/Line + 4 Mic/Stereo Line Channels

Model: DC-CMS1000-3-MIG MSRP: $3469.00

Quick Quote View Details

Dynacord - 12 Mic/Line + 4 Mic/Stereo Line Channels

Model: DC-CMS1600-3-MIG MSRP: $4428.00

Quick Quote View Details

Dynacord - 18 Mic/Line + 4 Mic/Stereo Line Channels

Model: DC-CMS2200-3-MIG MSRP: $5165.00

Quick Quote View Details

Dynacord - 4 Mic/Line + 2 Mic/Stereo Line Channels + 2 Stereo Line Channels

Model: DC-CMS600-3-MIG MSRP: $2509.00

Quick Quote View Details

RDL - Desktop Chassis Foot Kit for DC Series Desktop Chassis

Model: DC-F MSRP: $32.28

The DC-F is an adapter kit that adds feet to an RDL DC-1, DC-2, DC-3 or DC-4 Desktop Chassis for free-standing use. The kit contains two adapter plates with rubber feet that include a provision for secure wire entry under the rear of the desktop...

Quick Quote View Details

Dynacord - Lid for CMS 1000-3 or PowerMate 1000-3

Model: DC-LID1000 MSRP: $299.00

Quick Quote View Details

Dynacord - Power Mixer, 6 Mic/Line + 4 Mic/Stereo Line Channels

Model: DC-PM1000-3-UNIV MSRP: $4708.00

Quick Quote View Details

Dynacord - Power Mixer, 12 Mic/Line + 4 Mic/Stereo Line Channels

Model: DC-PM1600-3-UNIV MSRP: $5434.00

Quick Quote View Details

Dynacord - Power Mixer, 18 Mic/Line + 4 Mic/Stereo Line Channels

Model: DC-PM2200-3-UNIV MSRP: $6520.00

Quick Quote View Details

Dynacord - Power Mixer, 4 Mic/Line + 4 Mic/Stereo Line Channels, 3xAux, Dual 24 bit Stereo Effects

Model: DC-PM600-3-MIG MSRP: $3259.00

Quick Quote View Details

Dynacord - 19 Rackmountkit for CMS 600-3

Model: DC-RMK-CMS-3 MSRP: $143.00

Quick Quote View Details

Dynacord - 19 Rackmount Kit for PowerMate 600-3

Model: DC-RMK-PM600-3 MSRP: $120.00

Quick Quote View Details

Dynacord - Rackmount Kit for PowerMate 1000-3

Model: DC-RMK1000-3 MSRP: $144.00

Quick Quote View Details

Dynacord - Rackmount Kit for CMS1000-3 (coloured)

Model: DC-RMK1000CMS MSRP: $166.00

Quick Quote View Details

Dynacord - Rear Rackmount Kit

Model: DC-RMK15 MSRP: $105.00

Quick Quote View Details

RDL - ACM Detector

Model: DCF-100MB MSRP: $537.24

Quick Quote View Details

Yamaha - YAMAHA Digital Controller Hub 8 Port

Model: DCH8 MSRP: $310.00

Height: 1.7"
Width: 5.2"
Depth: 1.7"

Quick Quote View Details

Crown - 2x1250W Power Amplifier

Model: DCI2X1250N MSRP: $3810.00

The new DriveCore™ install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry's hi...

Quick Quote View Details

Crown - DCi 2 2400N 2X2400W Power Amplifier

Model: DCI2X2400N MSRP: $7086.00

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry's highest q...

Quick Quote View Details

Crown - DCI2X300 DriveCore Install Analog 2-Channel Amplifier 2X300 Watts

Model: DCI2X300 MSRP: $1720.00

The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry's highes...

Quick Quote View Details

Crown - DCI2X600 DriveCore Install Analog 2 Channel 2x600 Watt Amplifier

Model: DCI2X600 MSRP: $2556.00

The new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry's hi...

Quick Quote View Details

Crown - DCi 4 1250DA 4X1250W Power Amp, Dante-enabled w/DSP DriveCore DA Series

Model: DCI4X1250DA MSRP: $7090.00

For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for ...

Quick Quote View Details

Crown - DCi 4 2400N 4X2400W Power Amplifier

Model: DCI4X2400N MSRP: $11434.00

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry's highest q...

Quick Quote View Details

Crown - DCI4|300 DriveCore Dante Install Series Analog 4X300 Amplifier

Model: DCI4X300DA MSRP: $3876.00

For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for ...

Quick Quote View Details

Crown - DCI4|600; DriveCore Install Series - Analog

Model: DCI4X600 MSRP: $5384.00

The new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry's hi...

Quick Quote View Details

Crown - DCI8X600; 8 Channel, 600W, 70V, DriveCore Install Series - Analog

Model: DCI8X600 MSRP: $8364.00

The new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore™ technology. DCi Series amplifiers are designed, engineered and manufactured to the indust...

Quick Quote View Details

Williams Sound - ILD100DC Induction Loop Driver 110VAC mains PSU

Model: DCILD100USXX MSRP: $930.00

The IDL100 has been designed as a high quality amplifier for small to medium size induction loop systems in places such as video conference facilites, meeting rooms, small seminar rooms, TV rooms, nursing homes, private homes, reception and wait...

Quick Quote View Details

Audix - Flexible mini-gooseneck with drum tension lug clamp

Model: DCLAMP MSRP: $36.00

The DCLAMP is a low profile, simple-to-use mounting system that eliminates the need for bulky mic stands. Easily operated, the DCLAMP is provided with a standard 5/8-inch thread adapter, which allows most mics to be used by just simply changing ...

Quick Quote View Details

Audix - Flexible mini-gooseneck for MicroD & The MICROS w/drum tension lug clamp

Model: DCLAMPMICRO MSRP: $48.00

Flexible mini-gooseneck with drum tension lug clamp with shockmount ring for Micros series.

Quick Quote View Details

Audix - Heavy duty snap on clip

Model: DCLIP MSRP: $18.00

The D-Clip (MC-4) is a heavy duty, simple-to-use micclamp system that attaches to a mic stand or any number of popular devices with either a 3/8" or 5/8" threaded surface. Such products include boom stands, tri-pods, Audix D-Vice, Audix D-Clamp,...

Quick Quote View Details

Yamaha - YAMAHA DIGITAL CONTROL PANEL

Model: DCP1V4S-US MSRP: $176.00

DCP1V4S with one volume knob and four switches controllers provide flexible external control of several functions such as preset recall, levels, and SD card playback.The series comprises of three different models that feature various configurati...

Quick Quote View Details

Yamaha - YAMAHA DCP4V4S Digital Control Panel

Model: DCP4V4S-US MSRP: $353.00

DCP4V4S with four volume knobs and four switches controllers provide flexible external control of several functions such as preset recall, levels, and SD card playback.The series comprises of three different models that feature various configura...

Quick Quote View Details

RDL - RDL Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

Model: DD-BN22 MSRP: $1150.50

The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides ...three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN22's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on XLR Jacks on front panels
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 XLR Out-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BN22C MSRP: $1160.50

Mount Type: Wall Mount
Application/Usage: Microphone

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 Out on Rear-Panel Terminal Block-White

Model: DD-BN2M MSRP: $1071.38

The DD-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the ...DD-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2M fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2M is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2M. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN2M in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN2M is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN2M's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BN2MC MSRP: $1081.38

Mount Type: Wall Mount
Color Family: White
Product Color: White

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-1 XLR In and 1 Mini-jack In, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BN2MLC MSRP: $1029.27

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-2 XLR In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-White

Model: DD-BN31 MSRP: $1197.25

The DD-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detacha...ble terminal block. Special software is not required to configure the DD-BN31. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input provides a switch to configure the input for stereo or summed mono. The Mini-jack output provides a switch to configure the output for stereo or left-channel mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN31 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. The Mini-jack left and right inputs are each converted to a separate Dante network transmit channel. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. The input is equipped with a selector to sum the left and right Mini-jack inputs. The summed signal feeds both Dante transmit channels. Two Dante audio channels are converted to unbalanced line level to feed the front-panel Mini-jack. Each channel provides -10 dBV unbalanced for a network digital audio level of -20 dBFS. The left and right Mini-jack channels are normally fed from Dante receive channels 3 and 4 (stereo). The Mini-jack output is equipped with a selector to feed both output channels from Dante receive channel 3 (mono). This selector may be set from the front of the unit when the cover plate is not installed. Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN31. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN31 in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN31 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN31's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Four Audio Inputs and Four Audio Outputs
One Mini-jack and Two XLR Front-Panel Inputs
One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-2 XLR In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BN31C MSRP: $1207.25

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-4 XLR In, 2 Out on Rear-Panel Terminal Block-White

Model: DD-BN40 MSRP: $1231.90

The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the D...D-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics. The four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The outputs are connected through a detachable terminal block. The outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN40 in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN40 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN40's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Four Audio Inputs and Two Audio Outputs
Four XLR Front-Panel Inputs
Converts Four Standard XLR Mic or Line Audio Sources to Dante Network Channels

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-4 XLR In, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BN40C MSRP: $1241.90

Mount Type: Wall Mount
Color Family: White
Product Color: White

Quick Quote View Details

RDL - Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BTN44C MSRP: $1364.34

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-Software Configurable-2 XLR In, 2 RCA In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-White

Model: DD-RN31 MSRP: $1206.96

The DD-RN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input, left and right RCA jack inputs and one stereo Mini-jack line output on the front panels, plus two line... outputs on a rear-panel detachable terminal block. The module is configured and adjusted using RDL CONSOLE or other network control software. The DD-RN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-RN31 is PoE powered, and is available in multiple finishes with optional customized graphics.Mic/Line to network sectionThe two XLR inputs are each converted to a separate Dante network transmit channel. Gain settings are software-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. P48 phantom voltage may be software enabled when an input is set for mic level.Line to network sectionThe Mini-jack and RCA jack left and right inputs each provide a network digital audio level of -18 dBFS for an unbalanced -10 dBV input. The control software allows each of these inputs to feed either or both of two Dante channels. Multiple sources fed to a single Dante output are summed.Network to line sectionTwo Dante audio channels are converted to unbalanced line level to feed the front-panel Mini-jack. Each channel provides -10 dBV unbalanced for a network digital audio level of -18 dBFS.Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS.Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.The DD-RN31 is a professional grade product with RDL mic preamplifiers for studio quality fidelity and low noise performance, coupled through XLR jacks housed in a steel chassis with dual powder-coated or stainless steel Decora® front plates.The DD-RN31's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Four Audio Inputs and Four Audio Outputs
One Mini-jack, Two RCA Jacks and Two XLR Front-Panel Inputs
One Mini-jack Front-Panel Output; Two Balanced Outputs on Rear-Panel Terminal Block

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-Software Configurable-2 XLR In, 2 RCA In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST

Model: DD-RN31C MSRP: $1216.96

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-4 XLR In, 2 Out on Rear-Panel Terminal Block-White

Model: DD-RN40 MSRP: $1205.00

The DD-RN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. The module is configured and adjusted using RDL CON...SOLE or other network control software. The DD-RN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-RN40 is PoE powered, and is available in multiple finishes with optional customized graphics.Mic/Line to network sectionThe four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are software-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. P48 phantom voltage may be software enabled when an input is set for mic level.Network to line sectionTwo Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a software controlled attenuator adjustable in 1 dB steps to a maximum attenuation of 62 dB then OFF. The outputs are connected through a detachable terminal block.The outputs are intended for connection to RDL AMS connectors mounted in Decora®-style plates that match the DD-RN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-RN40 in a triple gang box or may be mounted remotely in a single box.Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.The DD-RN40 is a professional grade product with RDL mic preamplifiers for studio quality fidelity and low noise performance, coupled through XLR jacks housed in a steel chassis with dual powder-coated or stainless steel Decora front plates.The DD-RN40's superior performance specifications make it ideally suited to installations requiring network control and exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Four Audio Inputs and Two Audio Outputs
Four XLR Front-Panel Inputs
Two Outputs on Rear Panel Detachable Terminal Block

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-4 XLR In, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-RN40C MSRP: $1215.00

Application/Usage: Microphone

Quick Quote View Details

Category

Brand

Digital Inverter Compressor

Type

Frequency Range

Bridge Element

Price

Receiver Type

Microphone Type

Polar Pattern

Number of Battery & Surge Outlets

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Sitemaps

Downloads